Valve Mechanism Cover - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Show/hide table
| |
| Illustration 1 | g06262112 |
Show/hide table
| |
| Illustration 2 | g06262147 |
Show/hide table
| |
| Illustration 3 | g06262150 |
Show/hide table
 |
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Show/hide table
| |
| Illustration 4 | g06262152 |
Show/hide table
| |
| Illustration 5 | g06262154 |
Show/hide table
| |
| Illustration 6 | g06262157 |
- Install the valve mechanism cover in the reverse order of removal.
Show/hide table
| |
| Illustration 7 | g06262159 |
Show/hide table
| |
| Illustration 8 | g06262161 |
Caterpillar Information System:
New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J} New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J}
3516C HD Generator Set with Gearbox General Hazard Information
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Remove and Install
C7.1 Marine Propulsion Engine Transmission Oil Cooler - Remove and Install
C7.1 Marine Propulsion Engine Transmission Oil Temperature Sensor - Remove and Install
C7.1 Marine Propulsion Engine Transmission Oil Pressure Sensor - Remove and Install
793F Off-Highway Truck Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
3516C HD Generator Set with Gearbox Reference Information
C175 Tier 4 Final Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
793F Off-Highway Truck Engine Supplement Nitrogen Oxide Sensor (Exhaust Inlet) - Remove and Install
PVT120 Photovoltaic Modules Module - Inspect
3516C HD Generator Set with Gearbox Drive Gearbox Oil - Change
Improved Camera is Now Used on Certain Cat® Products {1408} Improved Camera is Now Used on Certain Cat® Products {1408}
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Disassemble
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Assemble
C7.1 Marine Propulsion Engine Electric Starting Motor - Remove and Install
C7.1 Marine Propulsion Engine Flywheel - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment Diesel Particulate Filter - Remove and Install - If Equipped
Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines {1071, 1100, 1250, 1270, 1274, 1403, 1716, 1901, 1920} Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines {1071, 1100, 1250, 1270, 1274, 1403, 1716, 1901, 1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Stopping the Machine
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Piston Motor (Fan Drive)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Schematic (Hydraulic Fan)
3500E Marine Engines On-Board Replacement Parts
C175-20 Locomotive Engine Injector Solenoid - Test