C7.1 Marine Engine Caterpillar


Coolant Level Sensor - Remove and Install

Usage:

C7.1 JEZ

Removal Procedure



    Illustration 1g06092766

  1. Disconnect harness assembly (2) and remove coolant level sensor (1).

Installation Procedure

  1. Install coolant level sensor (1) in the reverse order of removal.

    1. Tighten coolant level sensor (1) to a torque of 22 ± 3 N·m (195 ± 27 lb in).

Caterpillar Information System:

C7.1 Marine Engine Engine Oil Pan - Remove and Install
3500B Locomotive Engines Overhaul (Top End)
C7.1 Marine Engine Crankcase Breather - Remove
3516E Engines for Caterpillar Built Machines Piston and Rings
New Engine Software Is Now Used on Certain C7.1 Generator Set {1920} New Engine Software Is Now Used on Certain C7.1 Generator Set {1920}
G3512 Generator Set Engines Exhaust Temperature - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Hood - Remove and Install - Right
3500B Locomotive Engines Overhaul (Major)
C11, C13, C15, and C18 Industrial Engines Sensor Signal (Analog, Passive) - Test
C13 Engines for Caterpillar Built Machines Speed Control - Test
Cat® Detect Object Detection System Related Components
Cat® Detect Object Detection System Diagnostic Summary Screen
Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225} An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225}
New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262} New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262}
G3512 Generator Set Engines Ignition Primary - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines General Information
C175-16 and C175-20 Locomotive Engines Electronic Control Module (Engine) - Remove and Install
Cat® Detect Object Detection System Operational Problems
Cat® Detect Object Detection System Event Codes
Cat® Detect Object Detection System Diagnostic Code List
Cat® Detect Object Detection System Object Detection Sensor - Adjust
Cat® Detect Object Detection System Display Module - Flash Program
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.