Crankcase Breather - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
When disconnecting and connecting the plastic tube assemblies for the crankcase breather system, the plastic tube assemblies should not be twisted. Twisting of the plastic tube assemblies will result in the seals being damaged. Damaged to seals will result in leakage. |
- Disconnect hoses (1), (2), and (3).
Show/hide table
Illustration 2 g06141484 - Remove bolts (5) and crankcase breather (4).
Show/hide table
| |
| Illustration 1 | g06141470 |
Caterpillar Information System:
3516E Engines for Caterpillar Built Machines Piston and Rings
New Engine Software Is Now Used on Certain C7.1 Generator Set {1920} New Engine Software Is Now Used on Certain C7.1 Generator Set {1920}
G3512 Generator Set Engines Exhaust Temperature - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Hood - Remove and Install - Right
3500B Locomotive Engines Overhaul (Major)
C11, C13, C15, and C18 Industrial Engines Sensor Signal (Analog, Passive) - Test
C13 Engines for Caterpillar Built Machines Speed Control - Test
Cat® Detect Object Detection System Related Components
Cat® Detect Object Detection System Diagnostic Summary Screen
Cat® Detect Object Detection System Configuration Screen
C11, C13, C15, and C18 Industrial Engines Sensor Supply - Test
Cat® Detect Object Detection System Main Screen
3500B Locomotive Engines Overhaul (Top End)
C7.1 Marine Engine Engine Oil Pan - Remove and Install
C7.1 Marine Engine Coolant Level Sensor - Remove and Install
Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225} An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225}
New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262} New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262}
G3512 Generator Set Engines Ignition Primary - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines General Information
C175-16 and C175-20 Locomotive Engines Electronic Control Module (Engine) - Remove and Install
Cat® Detect Object Detection System Operational Problems
Cat® Detect Object Detection System Event Codes