Electronic Control Module (Engine) - Remove and Install
- Remove bolts (2) and cover (1).
Show/hide table
Illustration 2 g06093314 - Remove bolts (3), disconnect harness assembly (5), and harness assembly (6).
- Remove electronic control module (4).
Show/hide table
Illustration 1 | g06093170 |
- Install electronic control module (4) in the reverse order of removal.
Caterpillar Information System:
C2.4 Tier 4 Final Engines for Caterpillar Built Machines General Information
G3512 Generator Set Engines Ignition Primary - Test
New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262} New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262}
An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225} An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225}
Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
C7.1 Marine Engine Coolant Level Sensor - Remove and Install
C7.1 Marine Engine Engine Oil Pan - Remove and Install
3500B Locomotive Engines Overhaul (Top End)
C7.1 Marine Engine Crankcase Breather - Remove
3516E Engines for Caterpillar Built Machines Piston and Rings
New Engine Software Is Now Used on Certain C7.1 Generator Set {1920} New Engine Software Is Now Used on Certain C7.1 Generator Set {1920}
Cat® Detect Object Detection System Operational Problems
Cat® Detect Object Detection System Event Codes
Cat® Detect Object Detection System Diagnostic Code List
Cat® Detect Object Detection System Object Detection Sensor - Adjust
Cat® Detect Object Detection System Display Module - Flash Program
3516E Engines for Caterpillar Built Machines Gear Group (Rear)
DE Series Generator Sets With Cat C3.3 Engine Product Description
C280 Marine Engines SCR Catalyst Temperature Sensor - Test
C175-16 and C175-20 Locomotive Engines Crankshaft - Remove
C175-16 and C175-20 Locomotive Engines Camshaft - Remove
3512E Engines Accumulator (Fuel Injection) - Remove and Install
A New Wastegate Bellows Assembly Is Used for Certain 3512C Heavy-Duty Locomotive Engines {1059} A New Wastegate Bellows Assembly Is Used for Certain 3512C Heavy-Duty Locomotive Engines {1059}