New Engine Software Is Now Used on Certain C7.1 Generator Set {1920}
- Generator Set
- C7.1 GEN SET (S/N: MRP1-UP)
Description Of Change: New engine software is now used on certain C7.1 Generator Set. The new engine software has improved Electronic Control Module (ECM) power up timer to allow the remote signals to work efficiently.
Adaptable To: The new and former part numbers are listed in Table 1.
Show/hide table
| Qty | New Part Number | Description | Former Part Number |
| 1 | Engine Software | ||
Show/hide table
| Sales Model | Adaptable Serial Number | Effective Serial Number |
|---|---|---|
| C7.1 GEN SET | S/N:MRP1-846 | S/N:MRP847-UP |
Caterpillar Information System:
G3512 Generator Set Engines Exhaust Temperature - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Hood - Remove and Install - Right
3500B Locomotive Engines Overhaul (Major)
C11, C13, C15, and C18 Industrial Engines Sensor Signal (Analog, Passive) - Test
C13 Engines for Caterpillar Built Machines Speed Control - Test
Cat® Detect Object Detection System Related Components
Cat® Detect Object Detection System Diagnostic Summary Screen
Cat® Detect Object Detection System Configuration Screen
C11, C13, C15, and C18 Industrial Engines Sensor Supply - Test
Cat® Detect Object Detection System Main Screen
G3512 Generator Set Engines Engine Monitoring System
C13 Engines for Caterpillar Built Machines Injector Solenoid - Test
3516E Engines for Caterpillar Built Machines Piston and Rings
C7.1 Marine Engine Crankcase Breather - Remove
3500B Locomotive Engines Overhaul (Top End)
C7.1 Marine Engine Engine Oil Pan - Remove and Install
C7.1 Marine Engine Coolant Level Sensor - Remove and Install
Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}
An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225} An Improved Connecting Rod Bolt Is Now Used for Certain C11 and C13 Engines {1225}
New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262} New Fuel Filter Base Isolation Mounts Are Now Available For Certain C13 Engines {1262}
G3512 Generator Set Engines Ignition Primary - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines General Information
C175-16 and C175-20 Locomotive Engines Electronic Control Module (Engine) - Remove and Install