Related Components
Show/hide table
Illustration 1 | g01913135 |
Flood lamps are mounted to the brackets for the camera on the left and right side of the machine. The flood lamp is used to provide illumination for the cameras that are mounted to the sides of the machine.
Show/hide table
Pin | Input |
1 | 24 V |
2 | Ground |
Show/hide table
Illustration 2 | g06095200 |
20 Amp Power Converter (1) Connector A (2) Connector B (3) 443-6362 Power Converter |
Show/hide table
Connector A | Connector B | ||
---|---|---|---|
Signal Identification | Pin | Signal Identification | Pin |
- | 1 | 24V Input | 1 |
Ignition Input | 2 | Ground | 2 |
- | 3 | 12V Switched Output | 3 |
Memory Output | 4 | Memory Output | 4 |
- | 5 | - | - |
- | 6 | - | - |
Caterpillar Information System:
Cat® Detect Object Detection System Diagnostic Summary Screen
Cat® Detect Object Detection System Configuration Screen
C11, C13, C15, and C18 Industrial Engines Sensor Supply - Test
Cat® Detect Object Detection System Main Screen
G3512 Generator Set Engines Engine Monitoring System
C13 Engines for Caterpillar Built Machines Injector Solenoid - Test
Cat® Detect Object Detection System Display
3500C Locomotive Engines Overhaul (In-Frame)
Cat® Detect Object Detection System General Information
C11, C13, C15, and C18 Industrial Engines Sensor Signal (Analog, Active) - Test
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Emergency Stopping
PM820, PM822, and PM825 Cold Planer Machine Systems Lower Sheave (Rotor Drive) - Remove and Install
C13 Engines for Caterpillar Built Machines Speed Control - Test
C11, C13, C15, and C18 Industrial Engines Sensor Signal (Analog, Passive) - Test
3500B Locomotive Engines Overhaul (Major)
PM820, PM822, and PM825 Cold Planer Machine Systems Hood - Remove and Install - Right
G3512 Generator Set Engines Exhaust Temperature - Test
New Engine Software Is Now Used on Certain C7.1 Generator Set {1920} New Engine Software Is Now Used on Certain C7.1 Generator Set {1920}
3516E Engines for Caterpillar Built Machines Piston and Rings
C7.1 Marine Engine Crankcase Breather - Remove
3500B Locomotive Engines Overhaul (Top End)
C7.1 Marine Engine Engine Oil Pan - Remove and Install
C7.1 Marine Engine Coolant Level Sensor - Remove and Install
Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379} Aluminum Charge Air Cover and Exhaust Gas Cooler Replacement Procedure for Certain C18 Engines {1052, 1061, 1379}