Engine Oil Filter Base - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
Start By:
- Remove the engine oil cooler.
- Disconnect tube assembly (1).
- Use Tooling (A) to remove oil filters (5). Drain the oil from the oil filters into a suitable container for storage or for disposal. Discard the filters.
- Remove four bolts (2). Remove three bolts (4) and remove engine oil filter base (3).
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
Show/hide table
Illustration 2 g02120154 - Remove plug (6), spring (7) and plunger (8).
- Remove plug (11), spring (10) and plunger (9).
Show/hide table
| |
| Illustration 1 | g02119597 |
- Install engine oil filter base (3) in the reverse order of removal.
- Apply clean engine oil to the seal which is found on oil filter assemblies (5). Tighten oil filters (5) by hand until the seal contacts the sealing surface of the oil filter base (3). Tighten oil filters (5) to an extra turn of 270 degrees.
Caterpillar Information System:
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Service Tools
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (First Stage Conveyor) - Test and Adjust - Main
TR35 Railway Transmission General Information
966L and 972L Wheel Loader Power Train, Steering, Braking, Hydraulic and Machine Systems Solenoid Valve (Transmission Clutch)
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Has Excessive White Smoke
TR35 Railway Transmission Torque Converter Housing
Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562} Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562}
C18 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355} A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355}
New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380} New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380}
C12.9 Marine Engines Cylinder Head - Remove and Install
C18 Generator Set Engines Engine Oil Cooler - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063} Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063}
C12.9 Marine Engines Flywheel - Remove and Install
A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207} A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207}
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Air Inlet and Exhaust System
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Pressure Sensor
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Supply - Test
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Diagnostic Trouble Codes
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Relief Valve (Main, Propel Pump) - Test and Adjust
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Lubrication System
3512E Engines Valve Lifter - Remove and Install