Inlet and Exhaust Valve Seat Inserts - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 166-7441 | Valve Seat Extractor Tool Group | 1 |
| B(1) | 9U-6898 | Valve Seat Driver (Exhaust) | 1 |
| 9U-6897 | Valve Seat Driver (Inlet) | 1 | |
Show/hide table
| (1) | Part of 9U-7530 Engine Tool Group |
Start By:
- Remove the inlet and exhaust valves.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove valve seat insert (1) from the cylinder head.
- Clean the bores in the cylinder head for the valve seat inserts. Remove any rough areas from the bores.
Show/hide table
| |
| Illustration 1 | g01082582 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lower the temperature of new valve seat insert (1).
- Use Tooling (B) to install the new valve seat insert in the cylinder head.
Note: Do not machine the prefinished valve seat inserts to correct the valve projection. Excessive valve projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Show/hide table
| |
| Illustration 2 | g01079028 |
End By:
- Install the inlet and exhaust valves.
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355} A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355}
New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380} New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380}
C12.9 Marine Engines Cylinder Head - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Relief Valve (Charge) - Test and Adjust - Propel
The Reuse and Salvage Guidelines for HVOF Cylinders has been Updated {0599, 0679, 0738, 4303, 5102, 7562} The Reuse and Salvage Guidelines for HVOF Cylinders has been Updated {0599, 0679, 0738, 4303, 5102, 7562}
3512E Engines Engine Oil Scavenge Pump - Remove and Install
TR35 Railway Transmission Torque Converter
New Flywheels Are Now Used on Certain G3500 Engines {1156} New Flywheels Are Now Used on Certain G3500 Engines {1156}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Oil Contamination - Test
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Basic Engine
Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562} Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562}
TR35 Railway Transmission Torque Converter Housing
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Has Excessive White Smoke
966L and 972L Wheel Loader Power Train, Steering, Braking, Hydraulic and Machine Systems Solenoid Valve (Transmission Clutch)
TR35 Railway Transmission General Information
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (First Stage Conveyor) - Test and Adjust - Main
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Service Tools
C18 Generator Set Engines Engine Oil Filter Base - Remove and Install
C18 Generator Set Engines Engine Oil Cooler - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063} Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063}
C12.9 Marine Engines Flywheel - Remove and Install