General Information
Show/hide table
Illustration 1 | g06042145 |
(1) Transmission Oil Filter
(2) Dead Engine Tow Pump Control Manifold (3) Transmission Control Modulating Valves (4) Transmission Oil Pump (5) Electronic Main Relief Valve (6) Torque Converter (7) Dead Engine Tow Pump (8) Transmission Output Flanges (9) Transmission Oil Sight Glass (10) Transmission Oil Fill Tube (11) Torque Converter Lockup Clutch Modulating Valve |
Power from the engine is transferred from the flywheel to the torque converter. Power is then transferred from the torque converter to the transmission input shaft.
The torque converter is configured with a lockup clutch. The lockup clutch will provide a direct drive capability between the engine and transmission input shaft.
Six hydraulically activated clutches in the transmission provide four forward speeds and four reverse speeds. Direction and speed selections are made by the powertrain ECM in response to the operator inputs.
Power from the transmission is transferred to the output transfer gear case. Power is sent through the input gear to the output gear.
Caterpillar Information System:
966L and 972L Wheel Loader Power Train, Steering, Braking, Hydraulic and Machine Systems Solenoid Valve (Transmission Clutch)
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Has Excessive White Smoke
TR35 Railway Transmission Torque Converter Housing
Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562} Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562}
C18 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355} A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355}
New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380} New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380}
C12.9 Marine Engines Cylinder Head - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Relief Valve (Charge) - Test and Adjust - Propel
The Reuse and Salvage Guidelines for HVOF Cylinders has been Updated {0599, 0679, 0738, 4303, 5102, 7562} The Reuse and Salvage Guidelines for HVOF Cylinders has been Updated {0599, 0679, 0738, 4303, 5102, 7562}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (First Stage Conveyor) - Test and Adjust - Main
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Service Tools
C18 Generator Set Engines Engine Oil Filter Base - Remove and Install
C18 Generator Set Engines Engine Oil Cooler - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063} Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063}
C12.9 Marine Engines Flywheel - Remove and Install
A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207} A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207}
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Air Inlet and Exhaust System
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Pressure Sensor
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Supply - Test
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Diagnostic Trouble Codes