745 and 740 GC & 740 EJECTOR Articulated Truck Systems Caterpillar


Pressure Sensor

Usage:

745 3F6


Illustration 1g06041220

Table 1
Specification for 320-3063 Pressure Sensor Gp 
Item  Qty  Part  Specification Description 
320-3063 Pressure Sensor Gp  Torque to 13 ± 3 N·m (115 ± 27 lb in)
Operating voltage is 5.00 ± 0.25 VDC. 
Operating temperature is −40 to 125 °C (−40 to 257 °F)

Caterpillar Information System:

DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Air Inlet and Exhaust System
A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207} A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207}
C12.9 Marine Engines Flywheel - Remove and Install
Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063} Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063}
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C18 Generator Set Engines Engine Oil Cooler - Remove and Install
C18 Generator Set Engines Engine Oil Filter Base - Remove and Install
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Service Tools
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (First Stage Conveyor) - Test and Adjust - Main
TR35 Railway Transmission General Information
966L and 972L Wheel Loader Power Train, Steering, Braking, Hydraulic and Machine Systems Solenoid Valve (Transmission Clutch)
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Has Excessive White Smoke
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Supply - Test
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Diagnostic Trouble Codes
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Relief Valve (Main, Propel Pump) - Test and Adjust
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Lubrication System
3512E Engines Valve Lifter - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor (First Stage) - Remove and Install
C175-20 Locomotive Engine Model View Illustrations
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Compression - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (Second Stage Conveyor) - Test and Adjust
Supplement for Up-rated 3500 Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Supplement for Up-rated 3500 Engines Crankshaft Wear Sleeves and Seals
Supplement for Up-rated 3500 Engines Engine Oil Filter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.