Flywheel - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3938 | Link Bracket | 2 |
- Disconnect harness assembly (1) and position out of the way. Remove bolts (3) and remove crankshaft speed sensor (2).
Show/hide table
Illustration 2 g06041526 - Install Tooling (A) and attach suitable lifting device to flywheel (5). The weight of flywheel (5) is approximately
26 kg (57 lb) . Remove bolts (4) and remove flywheel (5).
Show/hide table
| |
| Illustration 1 | g06041404 |
- Install flywheel (5) in the reverse order of removal. Tighten bolts (4) to a torque of
120 ± 6 N·m (89 ± 4 lb ft) and then turn an extra 90 degrees.
Caterpillar Information System:
Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063} Aftercooler Leaks on Certain C4.4 Marine Generator Sets {1063}
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C18 Generator Set Engines Engine Oil Cooler - Remove and Install
C18 Generator Set Engines Engine Oil Filter Base - Remove and Install
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Service Tools
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (First Stage Conveyor) - Test and Adjust - Main
TR35 Railway Transmission General Information
966L and 972L Wheel Loader Power Train, Steering, Braking, Hydraulic and Machine Systems Solenoid Valve (Transmission Clutch)
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Has Excessive White Smoke
TR35 Railway Transmission Torque Converter Housing
Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562} Reuse and Salvage Guidelines for Hydraulic Cylinder Components is Improved for All Off-Highway Trucks {0374, 0599, 0700, 4303, 5102, 7562}
C18 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207} A New Accessory Drive Bearing Is Used on Certain 3512E Tier 4 Final Engines {1207}
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Air Inlet and Exhaust System
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Pressure Sensor
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Supply - Test
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Diagnostic Trouble Codes
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Relief Valve (Main, Propel Pump) - Test and Adjust
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Lubrication System
3512E Engines Valve Lifter - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor (First Stage) - Remove and Install
C175-20 Locomotive Engine Model View Illustrations
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Compression - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (Second Stage Conveyor) - Test and Adjust