Hydraulic System Oil Level - Check
偏好設定: 請參閱操作及保養手冊, "機蓋傾斜"，以瞭解升起機器機蓋的正確程序指南。
Show/hide table
| |
| 插圖 1 | g03707123 |
附註當油冷卻時檢查油位。 處於作業溫度時，正常的膨脹會使油位升高。
Caterpillar Information System:
PM820, PM822, and PM825 Cold Planer Hydraulic Foldable Canopy Cylinder Ends - Lubricate
PM820, PM822, and PM825 Cold Planer Fuel Tank Water and Sediment - Drain
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Maintenance Interval Schedule
460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM620 and PM622 Cold Planer Engine Oil Level - Check
C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Quality - Test
C8.7 Marine Engine Decommissioning and Disposal
PM620 and PM622 Cold Planer Coolant Sample (Level 1) - Obtain
PM620 and PM622 Cold Planer Cooling System Coolant Level - Check
PM620 and PM622 Cold Planer Cooling System Coolant (ELC) - Change
C8.7 Marine Engine Fumes Disposal Filter Element - Replace
PM620 and PM622 Cold Planer Conveyors - Lubricate
PM620 and PM622 Cold Planer Hydraulic System Oil Sample - Obtain
460-9068 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9068 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM820, PM822, and PM825 Cold Planer Legs (Struts) - Lubricate
PM820, PM822, and PM825 Cold Planer Moldboard Cutting Edge - Inspect/Adjust/Replace
XQC1200 and XQC1600 Power Modules Inlet Manifold Pressure Sensor - Remove and Install
XQC1200 and XQC1600 Power Modules Inlet Manifold Temperature Sensor - Remove and Install
C8.7 Marine Engine Crankshaft Vibration Damper - Inspect
XQC1200 and XQC1600 Power Modules Temperature Sensor (Exhaust) - Remove and Install
PM820, PM822, and PM825 Cold Planer Pump Drive Oil Level - Check
PM820, PM822, and PM825 Cold Planer Pump Drive Oil Sample - Obtain
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil - Change
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Level - Check