Conveyors - Lubricate
Show/hide table
注意事項 |
---|
請勿爬上進料器。 無法碰觸到油嘴時請使用梯子。 使用梯子時,請隨時維持三點接觸。 |
在潤滑之前請擦拭所有油嘴。
Show/hide table
插圖 1 | g03706605 |
潤滑下部進料器尾部皮帶盤兩端的油嘴 (1)。 塗上潤滑劑,直到潤滑脂開始從軸承溢出為止。
Show/hide table
插圖 2 | g03706607 |
潤滑下部進料器頭部皮帶盤兩端的油嘴 (2)。 塗上潤滑劑,直到潤滑脂開始從軸承溢出為止。
Show/hide table
插圖 3 | g03706579 |
潤滑上部進料器尾部皮帶盤兩端的油嘴 (3)。 塗上潤滑劑,直到潤滑脂開始從軸承溢出為止。
Show/hide table
插圖 4 | g03706582 |
潤滑上部進料器頭部皮帶盤兩端的油嘴 (4)。 塗上潤滑劑,直到潤滑脂開始從軸承溢出為止。
Caterpillar Information System:
C8.7 Marine Engine Fuel System Secondary Filter - Replace
PM820, PM822, and PM825 Cold Planer Belt - Inspect/Adjust/Replace
C0.5 and C0.7 Industrial Engines Mounting and Dismounting
C8.7 Marine Engine Engine Oil and Filter - Change
PM620 and PM622 Cold Planer Battery or Battery Cable - Inspect/Replace
PM620 and PM622 Cold Planer Battery - Clean/Check
C8.7 Marine Engine Engine Oil Sample - Obtain
PM620 and PM622 Cold Planer Air Tank - Drain
C3.3 Industrial Engine Burn Prevention
C8.7 Marine Engine Fluid Recommendations
C3.4B Engines Fuel Rail Pressure Problem
XQC1200 and XQC1600 Power Modules Coolant Temperature Sensor - Remove and Install - Inlet Water Temperature Sensor
C8.7 Marine Engine Fumes Disposal Filter Element - Replace
PM620 and PM622 Cold Planer Cooling System Coolant (ELC) - Change
PM620 and PM622 Cold Planer Cooling System Coolant Level - Check
PM620 and PM622 Cold Planer Coolant Sample (Level 1) - Obtain
C8.7 Marine Engine Decommissioning and Disposal
C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Quality - Test
PM620 and PM622 Cold Planer Engine Oil Level - Check
460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Maintenance Interval Schedule
PM820, PM822, and PM825 Cold Planer Fuel Tank Water and Sediment - Drain
PM820, PM822, and PM825 Cold Planer Hydraulic Foldable Canopy Cylinder Ends - Lubricate
PM620 and PM622 Cold Planer Hydraulic System Oil Level - Check