Belt - Inspect/Adjust/Replace
- 打開機器右側的引擎檢修門。
Show/hide table
插圖 1 g03706536 - 在引擎關閉時鬆開螺栓 (2),然後取下蓋子 (1)。
Show/hide table
插圖 2 g06114636 (A) 新皮帶
(B) 已磨損皮帶 - 檢查蛇形皮帶的狀況。 時間一久,皮帶肋條的物料 (C) 會脫落。 肋條間的間距會增加 (D)。 物料脫落會導致皮帶盤滑輪接觸到皮帶溝。 這樣會導致皮帶滑動並加速磨損 (E)。 如果皮帶已經磨損或損壞,請更換皮帶。
- 將具有方形驅動器的棘輪插入位於皮帶張緊器 (4) 上的方孔。
- 順時針轉動皮帶張緊器 (4),以釋放皮帶張力。
- 拆下皮帶。
- 正確裝入新皮帶,如圖所示。
- 逆時針轉動皮帶張緊器 (4),以對皮帶施加張力。 便會自動維持正確的張力。
- 確定皮帶完全固定在皮帶盤上。
- 裝回蓋子 (1) 和螺栓 (2)。
- 關閉引擎右側檢修門。
Show/hide table
插圖 3 | g03706539 |
Caterpillar Information System:
C0.5 and C0.7 Industrial Engines Mounting and Dismounting
C8.7 Marine Engine Engine Oil and Filter - Change
PM620 and PM622 Cold Planer Battery or Battery Cable - Inspect/Replace
PM620 and PM622 Cold Planer Battery - Clean/Check
C8.7 Marine Engine Engine Oil Sample - Obtain
PM620 and PM622 Cold Planer Air Tank - Drain
C3.3 Industrial Engine Burn Prevention
C8.7 Marine Engine Fluid Recommendations
C3.4B Engines Fuel Rail Pressure Problem
XQC1200 and XQC1600 Power Modules Coolant Temperature Sensor - Remove and Install - Inlet Water Temperature Sensor
2014/08/01 New Instrument Panel Box Gp Is Now Available as a Service Replacement for Certain Cat® Products {4490}
2014/08/20 Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
C8.7 Marine Engine Fuel System Secondary Filter - Replace
PM620 and PM622 Cold Planer Conveyors - Lubricate
C8.7 Marine Engine Fumes Disposal Filter Element - Replace
PM620 and PM622 Cold Planer Cooling System Coolant (ELC) - Change
PM620 and PM622 Cold Planer Cooling System Coolant Level - Check
PM620 and PM622 Cold Planer Coolant Sample (Level 1) - Obtain
C8.7 Marine Engine Decommissioning and Disposal
C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Quality - Test
PM620 and PM622 Cold Planer Engine Oil Level - Check
460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Maintenance Interval Schedule
PM820, PM822, and PM825 Cold Planer Fuel Tank Water and Sediment - Drain