Fuel Tank Water and Sediment - Drain
Show/hide table
插圖 1 | g03707098 |
- 燃油箱排放閥位於機器左側的轉子前方。
- 在排放閥下方放置適當的容器,以接住溢出的燃油。
附註在排放閥接上暫時軟管以減少燃油飛濺。
- 打開燃油的排放閥。 讓水排放到容器中。 讓沉澱物排放到容器中。
- 關閉燃油的排放閥。
- 檢查是否有洩漏。 修復所有滲漏情形。 讓機器恢復運作狀態後,繼續檢查是否有滲漏情形。
附註按照當地法規棄置排出的物料。
附註請參閱操作及維護手冊, "一般危險事項",瞭解與盛裝溢放的液體相關資訊。
Caterpillar Information System:
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Maintenance Interval Schedule
460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8974 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM620 and PM622 Cold Planer Engine Oil Level - Check
C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Quality - Test
C8.7 Marine Engine Decommissioning and Disposal
PM620 and PM622 Cold Planer Coolant Sample (Level 1) - Obtain
PM620 and PM622 Cold Planer Cooling System Coolant Level - Check
PM620 and PM622 Cold Planer Cooling System Coolant (ELC) - Change
C8.7 Marine Engine Fumes Disposal Filter Element - Replace
PM620 and PM622 Cold Planer Conveyors - Lubricate
C8.7 Marine Engine Fuel System Secondary Filter - Replace
PM820, PM822, and PM825 Cold Planer Belt - Inspect/Adjust/Replace
PM820, PM822, and PM825 Cold Planer Hydraulic Foldable Canopy Cylinder Ends - Lubricate
PM620 and PM622 Cold Planer Hydraulic System Oil Level - Check
PM620 and PM622 Cold Planer Hydraulic System Oil Sample - Obtain
460-9068 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9068 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM820, PM822, and PM825 Cold Planer Legs (Struts) - Lubricate
PM820, PM822, and PM825 Cold Planer Moldboard Cutting Edge - Inspect/Adjust/Replace
XQC1200 and XQC1600 Power Modules Inlet Manifold Pressure Sensor - Remove and Install
XQC1200 and XQC1600 Power Modules Inlet Manifold Temperature Sensor - Remove and Install
C8.7 Marine Engine Crankshaft Vibration Damper - Inspect
XQC1200 and XQC1600 Power Modules Temperature Sensor (Exhaust) - Remove and Install
PM820, PM822, and PM825 Cold Planer Pump Drive Oil Level - Check
PM820, PM822, and PM825 Cold Planer Pump Drive Oil Sample - Obtain