Refill Capacities
发动机曲轴箱的容量包括工厂安装的机油滤清器的容量。
Show/hide table
| 润滑系统
近似加注容量 |
||
|---|---|---|
| 发动机 | 升 | 美加仑 |
| G3508 | 231 | 61 |
| G3512 | 338 | 89 |
| G3516 | 423 | 112 |
Show/hide table
| 辅助机油滤清器的近似容量 | ||||
| 辅助机油滤清器系统 | 包括滤芯在内的容量 | 不包括滤芯的容量(1) | ||
| 117-9550 机油滤清器组件(2) | |
|
||
| 118-8419 机油滤清器组件(3) | |
|
||
| 119-2104 机油滤清器组件(4) | |
|
||
Show/hide table
| (1) | 辅助机油滤清器系统通过增加机油容量来提高机油的使用寿命。 Caterpillar 不推荐使用辅助机油滤清器滤芯。 |
| (2) | 此组件包含 14 个滤芯。 此组件与 G3508 发动机一起使用。 |
| (3) | 此组件包含 14 个滤芯。 此组件与 G3512 发动机一起使用。 |
| (4) | 此组件包含 21 个滤芯。 此组件与 G3516 发动机一起使用。 |
为了保养冷却系统，必须确定冷却系统总容量。 冷却系统总容量会随每个装置有所不同。 冷却系统总容量等于水套水回路的容量加上后冷器回路的容量，再加上外部系统的容量。 外部系统容量包括以下组成部分：膨胀箱、热交换器、散热器和管路。 请参阅 Caterpillar 或设备的 OEM 提供的技术规格。 在下表中记录冷却系统总容量：
Show/hide table
| 冷却系统
近似加注容量 |
|||
| 系统 | G3508 | G3512 | G3516 |
| 水套水回路 | 114 L
30 美制加仑 |
148 L
39 US gal |
205 L
53 US gal |
| 后冷器回路 | 13 L
3.5 US gal |
15 L
4 US gal |
16.5 L
4.5 US gal |
| 外部系统 | |||
| 冷却系统总容量 | |||
Caterpillar Information System:
320D and 323D Excavators Machine System Specifications Auxiliary Hydraulic Lines
2014/07/25 Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
G3500 Engines Welding on Engines with Electronic Controls
C8.7 Marine Engines Engine Oil Pressure - Test
Inspection and Installation Procedure for C175 Exhaust Bellows {1059, 1061} Inspection and Installation Procedure for C175 Exhaust Bellows {1059, 1061}
C8.7 Marine Engines Vibration Damper - Check
3516C and C175-16 Engines Selective Catalytic Reduction DEF Tank Level Is Low
455-1184 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1184 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
C8.7 Marine Engines Cooling System - Test
2014/10/03 A New Tube Is Now Used for Certain 3512 and 3516 Marine and Petroleum Engines {1354}
C8.7 Marine Engines Supercharger - Inspect
Well Service Pumps Pump (Power End) Gears - Inspect
G3500 Engines Fluid Recommendations
XQC1200 and XQC1600 Power Modules Water Pump - Disassemble
G3500 Engines Engine Air Filter Service Indicator - Inspect
3516C and C175-16 Engines Selective Catalytic Reduction Sensor (Data Link Type) - Test
XQC1200 and XQC1600 Power Modules Water Pump - Assemble
XQC1200 and XQC1600 Power Modules Electronic Unit Injector - Remove
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070} Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
XQC1200 and XQC1600 Power Modules Electronic Unit Injector - Install
XQC1200 and XQC1600 Power Modules Cylinder Head - Remove
XQC1200 and XQC1600 Power Modules Cylinder Head - Install
3516C and C175-16 Engines Selective Catalytic Reduction SCR Catalyst Temperature Sensor - Test
XQC1200 and XQC1600 Power Modules Inlet and Exhaust Valve Springs - Remove and Install