Control Module (Automatic Temperature Control Unit) - Remove and Install
拆卸步骤
- 拆下盖 (1) 和螺钉。 拆下罩盖 (2) 。
Show/hide table
图 1 | g02235393 |
- 将螺钉 (3) 从控制面板 (4) 上拆下。
Show/hide table
图 2 | g02237715 |
- 断开线束组件 (5) 、 (6) 、 (7) 和 (8) 。
Show/hide table
图 3 | g02238123 |
- 断开线束组件 (9) 、 (10) 和 (11) 。
Show/hide table
图 4 | g02238193 |
- 断开天线 (12) 。 断开线束组件 (13) 、 (14) 、 (15) 和 (16) 。
Show/hide table
图 5 | g02238234 |
- 拆下控制模块 (4) 。
安装步骤
- 按与拆卸相反的顺序安装控制面板 (4) 。
Caterpillar Information System:
C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines Oil Contains Fuel
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
XQC1600 Power Module Fluid Recommendations
140 Motor Graders Transmission Case and Parts Group
C3.4B Engines Fuel Temperature Is High
120 Motor Graders Control Valve (Snow Plow/Dozer Lift)
2014/02/07 A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
2014/02/10 A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}
390F Excavator Machine Systems Track Roller Frame - Remove and Install
DE Series Generator Sets With Cat C3.3 Engine Engine Mounts - Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Plate Locations and Film Locations
DE Series Generator Sets With Cat C3.3 Engine Alternator - Inspect
DE Series Generator Sets With Cat C3.3 Engine Battery - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery - Replace
DE Series Generator Sets With Cat C3.3 Engine Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery or Battery Cable - Disconnect
DE Series Generator Sets With Cat C3.3 Engine Battery or Battery Cable - Disconnect