A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
- Engine:
- All 3600 Engines
- All C280 Engines
Description of Change: The new prelube oil pressure switch used is made with a steel body that improves the service life of the switch.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g03599379 |
448-5598 Pressure Switch | |
The new 448-5598 Pressure Switch replaces the previous 150-1240 Pressure Switch. The new pressure switch is adaptable back to the first production of the serial numbers listed above. This change is effective for engines built on or after 27January 2014.
Caterpillar Information System:
390F Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines Oil Contains Fuel
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
XQC1600 Power Module Fluid Recommendations
140 Motor Graders Transmission Case and Parts Group
C3.4B Engines Fuel Temperature Is High
2014/02/10 A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}
390F Excavator Machine Systems Track Roller Frame - Remove and Install
DE Series Generator Sets With Cat C3.3 Engine Engine Mounts - Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Plate Locations and Film Locations
DE Series Generator Sets With Cat C3.3 Engine Alternator - Inspect
DE Series Generator Sets With Cat C3.3 Engine Battery - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery - Replace
DE Series Generator Sets With Cat C3.3 Engine Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery or Battery Cable - Disconnect
DE Series Generator Sets With Cat C3.3 Engine Battery or Battery Cable - Disconnect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant (ELC) - Change