Plate Locations and Film Locations
Show/hide table
Illusztráció 1 | g01334490 |
Jellemző példa |
Caterpillar motorokat gyártási számmal és kivitelezési számmal lehet azonosítani. Ezek a számok a motor gyártási számának lemezén láthatók. Caterpillar márkakereskedője e számok alapján tudja meghatározni a motor által tartalmazott részegységeket. Ez az információ lehetővé teszi a cserealkatrészek cikkszámainak pontosan beazonosítását.
A motor gyártási számának lemeze a motorblokk jobb felső oldalán található, az üzemanyag-befecskendező szivattyú fölött.
Show/hide table
Illusztráció 2 | g01131696 |
Gyártási szám táblája |
Károsanyag-kibocsátási matrica
Megjegyzés Ez az információ az Egyesült Államokra és Kanadára vonatkozik.
Az ábrán egy jellemző példa látható.
Show/hide table
Illusztráció 3 | g01527177 |
Caterpillar Information System:
DE Series Generator Sets With Cat C3.3 Engine Engine Mounts - Inspect
390F Excavator Machine Systems Track Roller Frame - Remove and Install
2014/02/10 A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}
2014/02/07 A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
390F Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines Oil Contains Fuel
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
DE Series Generator Sets With Cat C3.3 Engine Alternator - Inspect
DE Series Generator Sets With Cat C3.3 Engine Battery - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery - Replace
DE Series Generator Sets With Cat C3.3 Engine Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery or Battery Cable - Disconnect
DE Series Generator Sets With Cat C3.3 Engine Battery or Battery Cable - Disconnect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant (ELC) - Change
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Extender (ELC) - Add
DE Series Generator Sets With Cat C3.3 Engine Cooling System Water Temperature Regulator - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Level - Check
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301} Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}