Engine Mounts - Inspect
Inspektoni pikat e montimit të motorit për përkeqësim dhe rrotullimin e duhur të bulonave. Dridhja e motorit mund të shkaktohet nga kushtet e mëposhtme:
- Montimi i pasaktë i motorit
- Përkeqësimi i pikave të montimit të motorit
Çdo pikë montimi e motorit që shfaq përkeqësim duhet të ndërrohet. Referojuni Botimit special, SENR3130, "Specifikimet e shtrëngimeve" për shtrëngimet e rekomanduara. Për më shumë informacion, referojuni rekomandimeve të prodhuesit të pjesës origjinale.
Caterpillar Information System:
390F Excavator Machine Systems Track Roller Frame - Remove and Install
2014/02/10 A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}
2014/02/07 A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
390F Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines Oil Contains Fuel
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Plate Locations and Film Locations
DE Series Generator Sets With Cat C3.3 Engine Alternator - Inspect
DE Series Generator Sets With Cat C3.3 Engine Battery - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery - Replace
DE Series Generator Sets With Cat C3.3 Engine Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery or Battery Cable - Disconnect
DE Series Generator Sets With Cat C3.3 Engine Battery or Battery Cable - Disconnect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant (ELC) - Change
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Extender (ELC) - Add
DE Series Generator Sets With Cat C3.3 Engine Cooling System Water Temperature Regulator - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Level - Check