DE Series Generator Sets With Cat C3.3 Engine Caterpillar


Battery - Replace

Usage:

C3.3DE33E0 EC3

------ PARALAJMËRIM! ------

Bateritë lëshojnë tymra të djegshëm që mund të shpërthejnë. Një shkëndijë mund të shkaktojë ndezjen e gazeve të djegshme. Kjo mund të shkaktojë plagosje ose vdekje.

Siguroni ventilimin e duhur të baterisë në vende të mbyllura. Ndiqni procedurën e duhur për të parandaluar qarqet e shkurtra elektrikë dhe/ose shkëndijat afër baterive. Mos pini duhan kur jeni duke kontrolluar bateritë.


------ PARALAJMËRIM! ------

Kabllot e baterisë ose bateritë nuk duhet të hiqen me kapakun në vend. Kapaku i baterisë nuk duhet të hiqet përpara se të bëhet ndonjë shërbim.

Heqja e kabllit të baterisë ose baterive me kapak mund të shkaktojë shpërthim duke shkaktuar plagosje personale.


  1. Ktheni çelësin e motorit në pozicionin OFF (fikur). Shkëputni të gjitha ngarkesat elektrike.

  2. Fikni të gjithë ngarkuesit e baterive. Shkëputni të gjithë ngarkuesit e baterive.

  3. Kablloja NEGATIV "-" lidh terminalin NEGATIV "-" të baterisë me terminalin NEGATIV "-" të motorinos. Shkëputni kabllon nga terminali NEGATIV "-" i baterisë.

  4. Kablloja POZITIVE "+" lidh terminalin POZITIV "+" të baterisë me terminalin POZITIV "+" të motorinos. Shkëputni kabllon nga terminali POZITIV "+" i baterisë.

    Shënim Gjithmonë riciklojini bateritë. Asnjëherë mos i hidhni bateritë. Asgjësoni bateritë e përdorura në një ambient të përshtatshëm për riciklim.

  5. Hiqni baterinë e përdorur.

  6. Vendosni baterinë e re.

    Shënim Përpara se të lidhni kabllot, sigurohuni që çelësi i ndezjes së motorit të jetë në pozicionin OFF (fikur).

  7. Lidhni kabllon nga motorinoja me terminalin POZITIV "+" të baterisë.

  8. Lidhni kabllon NEGATIVE "-" me terminalin NEGATIV "-" të baterisë.

Caterpillar Information System:

DE Series Generator Sets With Cat C3.3 Engine Alternator - Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Plate Locations and Film Locations
DE Series Generator Sets With Cat C3.3 Engine Engine Mounts - Inspect
390F Excavator Machine Systems Track Roller Frame - Remove and Install
2014/02/10 A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}
2014/02/07 A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
390F Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines Oil Contains Fuel
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery - Replace
DE Series Generator Sets With Cat C3.3 Engine Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery Electrolyte Level - Check
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Battery or Battery Cable - Disconnect
DE Series Generator Sets With Cat C3.3 Engine Battery or Battery Cable - Disconnect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant (ELC) - Change
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Extender (ELC) - Add
DE Series Generator Sets With Cat C3.3 Engine Cooling System Water Temperature Regulator - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Level - Check
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301} Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
2014/02/17 The Rework Procedure for the Powered Access Stairway (PAS) on Certain Off-Highway Trucks has been Updated {7253, 7254, 7255, 7256}
349F and 352F Excavators Machine System Specifications Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.