Transmission Case and Parts Group
Show/hide table
Illustration 1 | g03782517 |
Show/hide table
Specification for 381-0659 Planetary Case and Parts Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 183-7262 Plug As | For factory pre-assembly torque to For field application torque to |
2 | 5 | 8T-4189 Bolt | Torque to |
3 | 5 | 148-8409 Plug As | Torque to |
4 | 1 | 8T-4956 Bolt | Torque to |
5 | 1 | 4T-2069 Plug | Torque to |
6 | 2 | 8T-4186 Bolt | Torque to |
7 | 41 | 8T-4196 Bolt | Torque to |
8 | 5 | 164-5619 Plug As | Torque to |
9 | 1 | 8T-7547 Bolt | Torque to |
10 | 1 | 164-4180 Plug As | Torque to |
11 | 7 | 8T-4137 Bolt | Torque to |
12 | 5 | 148-8406 Plug As | Torque to |
13 | 11 | 8T-4908 Bolt | Torque to |
14 | 2 | 165-4929 Plug As | Torque to |
Show/hide table
Illustration 2 | g03782518 |
Detailed view of area A |
Show/hide table
Item | Qty | Part | Specification Description |
15 | 1 | 164-5567 Quick Disconnect Coupler As | Torque to |
16 | 1 | 148-8309 Adapter As | Torque to |
17 | 1 | 160-8492 Bolt | Torque to |
18 | 1 | 6V-1820 Bolt | Torque to |
19 | 1 | 6V-8212 Bolt | Torque to |
Show/hide table
Illustration 3 | g03782519 |
Show/hide table
Item | Qty | Part | Specification Description |
20 | - | - | Before assembly, the surfaces must be clean and free of oil and grease.
Before assembly, apply blue Loctite 5127 to the joint between the cover assembly and the transmission case. |
21 | 4 | 6V-3940 Bolt | Torque to |
22 | 1 | 1B-5170 Pipe Plug | Before assembly, the surfaces must be clean and free of oil and grease.
Before assembly, apply Loctite 545 to the first three threads starting from small end of the plug. Torque to |
23 | 2 | 6V-6317 Bolt | Torque to |
24 | 2 | 8C-3210 Bolt | Torque to |
25 | 1 | 197-4977 Plug As | Torque to |
Show/hide table
Illustration 4 | g03782524 |
Detailed view of area B |
Show/hide table
Item | Qty | Part | Specification Description |
26 | 3 | 8T-4189 Bolt | Torque to |
Caterpillar Information System:
C3.4B Engines Fuel Temperature Is High
120 Motor Graders Control Valve (Snow Plow/Dozer Lift)
140 Motor Graders Blade Lift Cylinder and Mounting
120 Motor Graders Control Valve (Scarifier)
120 Motor Graders Control Valve (Snow Plow/Dozer Angle)
140 Motor Graders Centershift Cylinder and Mounting
14L Motor Grader Hydraulic and Steering System Circle Drive
120 Motor Graders Control Valve (Ripper)
C4.4 Marine Generator Set Sensor Supply - Test
120 Motor Graders Control Valve (Circle Drive)
120 Motor Graders Control Valve (Wheel Lean)
120 Motor Graders Control Valve (Centershift)
XQC1600 Power Module Fluid Recommendations
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C3.4B Engines Oil Contains Fuel
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test
390F Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
2014/02/07 A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
2014/02/10 A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}