Control Valve (Snow Plow/Dozer Angle)
Show/hide table
Illustration 1 | g03595956 |
Show/hide table
Specification for 382-3299 Control Valve Gp | |||
Item | Qty | Part | Specification description |
1 | 1 | 318-3115 Check Valve Gp | Lubricate the seal lightly with the lubricant that is being sealed.
Torque to |
2 | 1 | 380-0819 Spring | Length under test force 1 is Test force 1 is Length under test force 2 is Test force 2 is Free length after test is |
3 | 4 | 3T-0849 Bolt | Torque to |
4 | 1 | 318-3040 Check and Relief Valve Gp | Lubricate the seal lightly with the lubricant that is being sealed.
Torque to |
5 | 2 | 278-1799 Solenoid Valve Gp | Torque to |
6 | 1 | Nut | Torque to |
7 | 2 | 8T-0267 Bolt | Torque to |
8 | 1 | 6E-3007 Spring | Length under test force is Test force is Free length after test is |
9 | 1 | 212-4961 Spring | Length under test force is Test force is Free length after test is |
10 | 1 | 244-2579 Plug | Torque to |
11 | 1 | 242-9264 Orifice Plug | Torque to |
Caterpillar Information System:
140 Motor Graders Centershift Cylinder and Mounting
14L Motor Grader Hydraulic and Steering System Circle Drive
120 Motor Graders Control Valve (Ripper)
C4.4 Marine Generator Set Sensor Supply - Test
120 Motor Graders Control Valve (Circle Drive)
120 Motor Graders Control Valve (Wheel Lean)
120 Motor Graders Control Valve (Centershift)
120 Motor Graders Control Valve (Sideshift)
120 Motor Graders Control Valve (Blade Tip)
120 Motor Graders Control Valve (Blade Lift)
140 Motor Graders Ripper
120 Motor Graders Control Valve (Articulation)
120 Motor Graders Control Valve (Scarifier)
140 Motor Graders Blade Lift Cylinder and Mounting
120 Motor Graders Control Valve (Snow Plow/Dozer Lift)
C3.4B Engines Fuel Temperature Is High
140 Motor Graders Transmission Case and Parts Group
XQC1600 Power Module Fluid Recommendations
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble
2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C3.4B Engines Oil Contains Fuel