120 Motor Graders Caterpillar

Control Valve (Snow Plow/Dozer Lift)

Usage:

120 E94

Show/hide table




Illustration 1	g03596077

Show/hide table

Table 1
Specification for 382-3298 Control Valve Gp
Item	Qty	Part	Specification description
1	1	318-3115 Check Valve Gp	Torque to 80 ± 15 N·m (59 ± 11 lb ft).
2	4	3T-0849 Bolt	Torque to 12 ± 3 N·m (106 ± 27 lb in).
3	1	380-0820 Spring	Length under test force 1 is 37.5 mm (1.48 inch). Test force 1 is 81 ± 15 N (18 ± 3 lb). Length under test force 2 is 26.9 mm (1.06 inch). Test force 2 is 590 ± 35 N (133 ± 8 lb). Free length after test is 39.188 mm (1.5428 inch).
4	1	380-0821 Spring	Length under test force 1 is 16.9 mm (0.67 inch). Test force 1 is 10 N (2 lb). Length under test force 2 is 11.5 mm (0.45 inch). Test force 2 is 237 ± 20 N (53 ± 4 lb). Free length after test is 17.138 mm (0.6747 inch).
5	2	278-1799 Solenoid Valve Gp	Torque to 5.5 ± 1.5 N·m (48.7 ± 13.3 lb in).
6	1	318-3052 Check and Relief Valve Gp	Lubricate the seal lightly with the lubricant that is being sealed. Torque to 80 ± 15 N·m (59 ± 11 lb ft).
7	1	Nut	Torque to 12 ± 2 N·m (106 ± 18 lb in).
8	2	8T-0267 Bolt	Torque to 12 ± 3 N·m (106 ± 27 lb in).
9	1	6E-3007 Spring	Length under test force is 8.60 mm (0.339 inch). Test force is 0.234 ± 0.024 N (0.053 ± 0.005 lb). Free length after test is 10.0 mm (0.39 inch).
10	1	244-2579 Plug	Torque to 5 ± 1 N·m (44 ± 9 lb in).
11	1	212-4961 Spring	Length under test force is 23.9 mm (0.94 inch). Test force is 14.25 ± 0.72 N (3.20 ± 0.16 lb). Free length after test is 27.24 mm (1.072 inch).
12	1	242-9264 Orifice Plug	Torque to 70 ± 7 N·m (52 ± 5 lb ft).

Caterpillar Information System:

140 Motor Graders Blade Lift Cylinder and Mounting

120 Motor Graders Control Valve (Scarifier)

120 Motor Graders Control Valve (Snow Plow/Dozer Angle)

140 Motor Graders Centershift Cylinder and Mounting

14L Motor Grader Hydraulic and Steering System Circle Drive

120 Motor Graders Control Valve (Ripper)

C4.4 Marine Generator Set Sensor Supply - Test

120 Motor Graders Control Valve (Circle Drive)

120 Motor Graders Control Valve (Wheel Lean)

120 Motor Graders Control Valve (Centershift)

120 Motor Graders Control Valve (Sideshift)

120 Motor Graders Control Valve (Blade Tip)

C3.4B Engines Fuel Temperature Is High

140 Motor Graders Transmission Case and Parts Group

XQC1600 Power Module Fluid Recommendations

307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Disassemble

307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Assemble

2014/02/26 Field Issue Resolutions for Certain 3512C Dynamic Gas Blending Well Service Engines {1072, 1274, 1408, 1439, 1907, 1917, 1920}

Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405} Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}

C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install

C3.4B Engines Oil Contains Fuel

C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install

C4.4 Marine Generator Set Sensor Signal (Analog, Active) - Test

390F Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install