G3500H Generator Set Engine Caterpillar


Pistons, Rings and Connecting Rods

Usage:

G3512H GF4


图 1g00807790
(1) 活塞
(2) 压缩环
(3) 油环
(4) 连杆
(5) 活塞销
(6) 销固定器
(7) 螺栓
(8) 连杆盖
(9) 连杆轴承

铝活塞 (1) 有三个环。 其中包括两道压缩环 (2) 和一道油环 (3)。 三道活塞环都位于活塞销孔以上。 顶部两个压缩环是矩形环。 油环是双件环。 发动机机油经由油环槽的孔流回到曲轴箱。

活塞通过活塞销 (5) 和两个销锁环 (6) 与连杆 (4) 相连。 连杆的销孔端成锥形。 这个锥面在负载重的区域给连杆和活塞更大的强度。 四个螺栓 (7),设定成一小角度,将连杆盖 (8) 固定到连杆上。 这种设计将连杆保持在最小宽度,因此可以使用较大的连杆轴承 (9),并仍能穿过缸套拆除连杆。

Caterpillar Information System:

G3500H Generator Set Engine Cooling System
C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C15
G3500H Generator Set Engine Lubrication System
G3500H Generator Set Engine Valve System Components
C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C18
G3500H Generator Set Engine Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
2014/03/07 New Engine Software Is Now Used for Certain Industrial and Generator Set C9 Engines {1901, 1902, 1920}
2013/11/13 New Exhaust Temperature Sensor Groups Are Used on Certain 3500, 3600, C175, and C280 Marine and Petroleum Off-Shore Applications {1408, 1900, 1906, 1919, 1921, 1922, 1928, 1929, 7498}
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C15
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C18
C280-08 Marine Engine After Stopping Engine
Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380} Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380}
G3500H Generator Set Engine Electric Starting System
2013/11/13 A New Alternator and Alternator Bracket Have Been Introduced on Certain C4.4 and C6.6 Engines {1405, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205} Reuse and Salvage for Engine Dampers {1202, 1205}
C15 and C18 On-Highway Engines Engine Oil Pump - Remove and Install
2014/02/20 New Anti Drift Valves are Now Used on Certain 345D and 349D Excavators {5059}
C280-16 Engine Alternator - Replace
CX31-P600 Petroleum Transmission Visual Inspection
CX31-P600 Petroleum Transmission Torque Converter Troubleshooting
C15 and C18 On-Highway Engines Water Temperature Regulator Housing - Remove and Install
CX31-P600 Petroleum Transmission Transmission Planetary Troubleshooting
C15 and C18 On-Highway Engines Flywheel - Remove and Install
CX31-P600 Petroleum Transmission Hydraulic Oil Contamination - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.