Engine Oil Filter Base - Remove and Install - C15
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 185-3630     | 带式扳手组件     | 1     |
开始:
- 拆下发动机机油冷却器。
- 断开软管组件 (1) 。
Show/hide table
图 1 | g03520397 |
- 使用工具 (A) 拆下机油滤清器 (4) 。 将机油从机油滤清器排入适当的容器中,以便保存或废弃处理。 废弃滤清器。
- 拆下螺栓 (2) ,然后拆下机油滤清器底座 (3) 。
- 拆下螺塞 (7) 和 (10) 。 拆下弹簧 (6) 和 (9) 。 拆下柱塞 (5) 和 (8) 。
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
Show/hide table
图 2 | g03520398 |
安装步骤
- 按相反的顺序安装发动机机油滤清器底座 (3) 。
- 将清洁的发动机机油涂抹至机油滤清器组件 (4) 上的密封件。 用手带紧机油滤清器 (4) ,直至密封件接触到机油滤清器底座 (3) 的密封表面。 拧紧机油滤清器 (4) ,使其再转动 270 度。 更换发动机机油。 请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要,请更换部件。
Caterpillar Information System:
G3500H Generator Set Engine Lubrication System
G3500H Generator Set Engine Valve System Components
C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C18
G3500H Generator Set Engine Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
2014/03/07 New Engine Software Is Now Used for Certain Industrial and Generator Set C9 Engines {1901, 1902, 1920}
2013/11/13 New Exhaust Temperature Sensor Groups Are Used on Certain 3500, 3600, C175, and C280 Marine and Petroleum Off-Shore Applications {1408, 1900, 1906, 1919, 1921, 1922, 1928, 1929, 7498}
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C15
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C18
C280-08 Marine Engine After Stopping Engine
Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380} Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380}
C280-16 Marine Engines Engine Power Ratings
CX31-P600 Petroleum Transmission Transmission Planetary
G3500H Generator Set Engine Cooling System
G3500H Generator Set Engine Pistons, Rings and Connecting Rods
G3500H Generator Set Engine Electric Starting System
2013/11/13 A New Alternator and Alternator Bracket Have Been Introduced on Certain C4.4 and C6.6 Engines {1405, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205} Reuse and Salvage for Engine Dampers {1202, 1205}
C15 and C18 On-Highway Engines Engine Oil Pump - Remove and Install
2014/02/20 New Anti Drift Valves are Now Used on Certain 345D and 349D Excavators {5059}
C280-16 Engine Alternator - Replace
CX31-P600 Petroleum Transmission Visual Inspection
CX31-P600 Petroleum Transmission Torque Converter Troubleshooting
C15 and C18 On-Highway Engines Water Temperature Regulator Housing - Remove and Install
CX31-P600 Petroleum Transmission Transmission Planetary Troubleshooting