G3500H Generator Set Engine Caterpillar


Valve System Components

Usage:

G3512H GF4
在发动机运转时,配气系统零部件控制进入气缸的空气和燃料流量以及从气缸中排出废气的流量。


图 1g00813876
(1) 摇臂
(2) 气门桥
(3) 气门旋转器
(4) 气门弹簧
(5) 推杆
(6) 阀
(7) 凸轮随动件
(8) 凸轮凸角

曲轴齿轮通过惰轮驱动凸轮轴。 凸轮轴与曲轴必须同步,以便在活塞运动和气门运动之间获得正确的关系。

每个气缸凸轮轴有两个凸轮轴凸角 (8)。 当凸轮轴转动时,凸轮轴凸尖引起凸轮随动件 (7) 和推杆 (5) 上下移动。

推杆移动摇臂 (1)。 摇臂的运动引起气门桥 (2) 在缸盖定位销上上下移动。 这种运动使气门 (6) 工作。 气门桥使一个摇臂能够同步运转两个气门。 每一缸都有两个进气门和两个排气门。

在发动机运转时,气门旋转器 (3) 转动气门。 气门旋转可使气门上的积碳保持在最少程度,从而延长气门的使用寿命。

当凸轮随动件 (7) 向下移动时,气门弹簧 (4) 关闭气门。

Caterpillar Information System:

C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C18
G3500H Generator Set Engine Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
2014/03/07 New Engine Software Is Now Used for Certain Industrial and Generator Set C9 Engines {1901, 1902, 1920}
2013/11/13 New Exhaust Temperature Sensor Groups Are Used on Certain 3500, 3600, C175, and C280 Marine and Petroleum Off-Shore Applications {1408, 1900, 1906, 1919, 1921, 1922, 1928, 1929, 7498}
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C15
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C18
C280-08 Marine Engine After Stopping Engine
Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380} Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380}
C280-16 Marine Engines Engine Power Ratings
CX31-P600 Petroleum Transmission Transmission Planetary
CX31-P600 Petroleum Transmission Oil Filter (Transmission)
CX31-P600 Petroleum Transmission General Information
G3500H Generator Set Engine Lubrication System
C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C15
G3500H Generator Set Engine Cooling System
G3500H Generator Set Engine Pistons, Rings and Connecting Rods
G3500H Generator Set Engine Electric Starting System
2013/11/13 A New Alternator and Alternator Bracket Have Been Introduced on Certain C4.4 and C6.6 Engines {1405, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205} Reuse and Salvage for Engine Dampers {1202, 1205}
C15 and C18 On-Highway Engines Engine Oil Pump - Remove and Install
2014/02/20 New Anti Drift Valves are Now Used on Certain 345D and 349D Excavators {5059}
C280-16 Engine Alternator - Replace
CX31-P600 Petroleum Transmission Visual Inspection
CX31-P600 Petroleum Transmission Torque Converter Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.