New Exhaust Temperature Sensor Groups Are Used on Certain 3500, 3600, C175, and C280 Marine and Petroleum Off-Shore Applications {1408, 1900, 1906, 1919, 1921, 1922, 1928, 1929, 7498}
- Engine:
- 3512C (S/N: T3P1-UP; T3R1-UP; T3W1-UP)
- Marine Engine:
- C280-12 (S/N: TSJ1-UP; RDW1-UP)
- Petroleum Engine:
- 3516C (S/N: PES1-UP)
- 3516C (S/N: TTJ1-UP; TKS1-UP; TKT1-UP; TKY1-UP)
- 3606 (S/N: 8RB1-UP)
- 3608 (S/N: 6MC1-UP)
- 3612 (S/N: 9RC1-UP)
- 3616 (S/N: 1PD1-UP)
- C175-16 (S/N: M6A1-UP; M6B1-UP; P6L1-UP; P5P1-UP)
- C280-16 (S/N: NKB1-UP; A4F1-UP; TDX1-UP)
- C280-6 (S/N: SCB1-UP; LDL1-UP)
- C280-8 (S/N: PKA1-UP; NDT1-UP)
Description of Change: The new thermal couples have a higher shell to thermocouple wire resistance which eliminates inaccuracies in the pyrometer read out.
Adaptable To: The new temperature sensor groups replace the existing temperature sensor groups. Refer to Table 2 for the new and former part numbers. The new temperature sensor groups are adaptable back to first production on the serial numbers listed above.
Show/hide table
New Part Number     | Former Part Number     |
383-2982     | 262-1957     |
383-2985     | 114-1653     |
Show/hide table
Effective Serial Numbers     |
S/N:T3P00204-UP     |
S/N:T3R00209-UP     |
S/N:T3W00202-UP     |
S/N:PES00687-UP     |
S/N:TTJ00365-UP     |
S/N:TKS00206-UP     |
S/N:TKT00202-UP     |
S/N:TKY00208-UP     |
S/N:8RB10286-UP     |
S/N:6MC00822-UP     |
S/N:9RC00542-UP     |
S/N:1PD00718-UP     |
S/N:M6A00109-UP     |
S/N:M6B01002-UP     |
S/N:P5P00002-UP     |
S/N:P6L01010-UP     |
S/N:RDW00156-UP     |
S/N:TSJ00166-UP     |
S/N:A4F00002-UP     |
S/N:NKB00199-UP     |
S/N:TDX00165-UP     |
S/N:LDL00117-UP     |
S/N:SCB00128-UP     |
S/N:NDT00149-UP     |
S/N:PKA00171-UP     |
Caterpillar Information System:
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C15
C15 and C18 On-Highway Engines Engine Oil Cooler - Remove and Install - C18
C280-08 Marine Engine After Stopping Engine
Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380} Installation Procedure For The New Throttle Body Cooling Lines On Certain G3500 Engines{1380}
C280-16 Marine Engines Engine Power Ratings
CX31-P600 Petroleum Transmission Transmission Planetary
CX31-P600 Petroleum Transmission Oil Filter (Transmission)
CX31-P600 Petroleum Transmission General Information
C280-16 Engine Belts - Inspect/Replace
C280-16 Engine Electrical System
2013/12/02 New Software Is Available for Tier 4 Interim C13 Atlas Copco XRVS1000 Air Compressor Engines {1920}
C15 and C18 On-Highway Engines Air Inlet Elbow - Remove and Install
2014/03/07 New Engine Software Is Now Used for Certain Industrial and Generator Set C9 Engines {1901, 1902, 1920}
G3500H Generator Set Engine Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C18
G3500H Generator Set Engine Valve System Components
G3500H Generator Set Engine Lubrication System
C15 and C18 On-Highway Engines Engine Oil Filter Base - Remove and Install - C15
G3500H Generator Set Engine Cooling System
G3500H Generator Set Engine Pistons, Rings and Connecting Rods
G3500H Generator Set Engine Electric Starting System
2013/11/13 A New Alternator and Alternator Bracket Have Been Introduced on Certain C4.4 and C6.6 Engines {1405, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205} Reuse and Salvage for Engine Dampers {1202, 1205}
C15 and C18 On-Highway Engines Engine Oil Pump - Remove and Install