Catalyst - Remove and Install
- Remove plate (1).
Show/hide table
Illustration 2 g03415038 - Remove catalyst assembly (2). The weight of catalyst assembly (2) is approximately
45 kg (99 lb) .
Show/hide table
| |
| Illustration 1 | g03415036 |
- Install catalyst assembly (2) in the reverse order of removal.
Caterpillar Information System:
3512E Petroleum Engines Flywheel Housing - Remove
3512C Petroleum Engines Vibration Damper - Remove and Install
3512E Petroleum Engines Engine Oil Pump - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Assemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies DC Bus Capacitor - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Disassemble
C7.1 Engines DEF Pressure Is High
3512C Petroleum Engines Engine Oil Cooler - Remove and Install
C7.1 Industrial Engine Fault Logging
C13 Generator Set Engine Engine Support (Front) - Remove and Install
3512C Petroleum Engines Air Shutoff - Remove and Install
3512C Petroleum Engines Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
3512E Petroleum Engines Hydraulic Starting Motor - Remove and Install
399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H} 399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H}
C7.1 Industrial Engine Battery Disconnect Switch - If Equipped
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Priming Pump
794 AC Off-Highway Truck Coolant Pressure Cap - Clean/Replace
C15 Petroleum Engines Maintenance Interval Schedule
2014/03/14 A New Wiring Harness Is Used in the Dosing Cabinets of Certain 3516C and C175-16 Engines {108H, 1091, 1408}
C4.4 Industrial Engine Battery Disconnect Switch
3516C Petroleum Engines Hydraulic Starting Motor - Remove and Install
C7.1 Engines Diesel Oxidation Catalyst Has Incorrect Inlet Temperature
C7.1 Engines Camshaft Position Sensor - Remove and Install
C4.4 Engines Diesel Oxidation Catalyst Has Low Conversion Efficiency