Vibration Damper - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Lifting Bracket | 2 |
B | - | Guide Stud 1 - 14 by 10 inch |
2 |
- Remove nuts (1) and guard assembly (2).
Show/hide table
Illustration 2 g03414997 - Remove two bolts (3) and install Tooling (B).
- Remove two bolts (5) and attach Tooling (A) and a suitable lifting device to vibration damper (4). The weight of vibration damper (4) is approximately
175 kg (385 lb) . Remove remaining bolts (3). Remove vibration damper (4).
Show/hide table
Illustration 1 | g03414989 |
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Lifting Bracket | 2 |
B | - | Guide Stud 1 - 14 by 10 inch |
2 |
C | 9S-3263 | Thread Lock Compound | - |
- Install Tooling (B) in the crankshaft.
- Attach Tooling (A) and a suitable lifting device to vibration damper (4). The weight of vibration damper (4) is approximately
175 kg (385 lb) . - Install the vibration damper on Tooling (B). Install bolts (3). Remove Tooling (B) and install remaining bolts (3). Tighten bolts (3) to a torque of
1125 ± 100 N·m (820 ± 74 lb ft) . - Remove Tooling (A). Apply Tooling (C) to the threads of bolts (5). Install bolts (5) and tighten to a torque of
55 ± 7 N·m (41 ± 5 lb ft) .Show/hide tableIllustration 4 g03414989 - Install guard assembly (2) and nuts (1).
Show/hide table
Illustration 3 | g03415007 |
Caterpillar Information System:
3512E Petroleum Engines Engine Oil Pump - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Assemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies DC Bus Capacitor - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Disassemble
C7.1 Engines DEF Pressure Is High
3512C Petroleum Engines Engine Oil Cooler - Remove and Install
C7.1 Industrial Engine Fault Logging
C13 Generator Set Engine Engine Support (Front) - Remove and Install
3512C Petroleum Engines Air Shutoff - Remove and Install
3512C Petroleum Engines Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
C7.1 Industrial Engine Fan Clearance - Check
C13 Generator Set Engine Turbocharger - Remove and Install
3512E Petroleum Engines Flywheel Housing - Remove
3512C Petroleum Engines Catalyst - Remove and Install
3512E Petroleum Engines Hydraulic Starting Motor - Remove and Install
399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H} 399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H}
C7.1 Industrial Engine Battery Disconnect Switch - If Equipped
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Priming Pump
794 AC Off-Highway Truck Coolant Pressure Cap - Clean/Replace
C15 Petroleum Engines Maintenance Interval Schedule
2014/03/14 A New Wiring Harness Is Used in the Dosing Cabinets of Certain 3516C and C175-16 Engines {108H, 1091, 1408}
C4.4 Industrial Engine Battery Disconnect Switch
3516C Petroleum Engines Hydraulic Starting Motor - Remove and Install
C7.1 Engines Diesel Oxidation Catalyst Has Incorrect Inlet Temperature