Engine Oil Cooler - Remove and Install
- Refer to Operation and Maintenance Manual, "Engine Oil and Filter- Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03414683 - Disconnect tubes (4), and remove bolts (1).
- Attach a suitable lifting device to engine oil cooler assembly (3). The weight of engine oil cooler assembly (16) is approximately
85 kg (188 lb) . - Remove bolts (2).
Show/hide table
Illustration 2 g03414740 - Remove bolts (5) and engine oil cooler assembly (3).
- Install engine oil cooler assembly (3) in the reverse order of removal.
Caterpillar Information System:
C7.1 Industrial Engine Fault Logging
C13 Generator Set Engine Engine Support (Front) - Remove and Install
3512C Petroleum Engines Air Shutoff - Remove and Install
3512C Petroleum Engines Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
C7.1 Industrial Engine Fan Clearance - Check
C13 Generator Set Engine Turbocharger - Remove and Install
C13 Generator Set Engine Vibration Damper and Pulley - Remove and Install
3512E Petroleum Engines Fuel Priming Pump - Remove and Install
349F and 352F Excavator Machine System Connector Locations
C13 Generator Set Engine Electric Starting Motor - Remove and Install
C13 Generator Set Engine Electronic Control Module - Remove and Install
2013/09/09 A New Elbow Is Used on Certain 3500 Engines {1371}
C7.1 Engines DEF Pressure Is High
3512E Petroleum Engines Engine Oil Cooler - Disassemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies DC Bus Capacitor - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Assemble
3512E Petroleum Engines Engine Oil Pump - Remove and Install
3512C Petroleum Engines Vibration Damper - Remove and Install
3512E Petroleum Engines Flywheel Housing - Remove
3512C Petroleum Engines Catalyst - Remove and Install
3512E Petroleum Engines Hydraulic Starting Motor - Remove and Install
399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H} 399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H}
C7.1 Industrial Engine Battery Disconnect Switch - If Equipped
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Priming Pump