Engine Support (Front) - Remove and Install
Start By:
- Remove the vibration damper and the pulley.
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03415456 Show/hide tableIllustration 2 g03415460 - Loosen clamp (1), clamp (3), and clamp (5).
- Remove hose (6) from valve (5).
- Remove valve (5) from tube (2).
- Remove tube (2).
Show/hide table
Illustration 3 g03415473 Show/hide tableIllustration 4 g03415477 - Support the front of the engine with a suitable lifting device. The weight of the engine is approximately
1406 kg (3100 lb) . - Remove bolts (8).
- Remove bolts (9) from engine support (7).
- Remove engine support (7) with a suitable lifting device from the front housing. The weight of engine support (7) is approximately
50 kg (110 lb.) .
- Install engine support (7) in the reverse order of removal.
Caterpillar Information System:
3512C Petroleum Engines Air Shutoff - Remove and Install
3512C Petroleum Engines Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
C7.1 Industrial Engine Fan Clearance - Check
C13 Generator Set Engine Turbocharger - Remove and Install
C13 Generator Set Engine Vibration Damper and Pulley - Remove and Install
3512E Petroleum Engines Fuel Priming Pump - Remove and Install
349F and 352F Excavator Machine System Connector Locations
C13 Generator Set Engine Electric Starting Motor - Remove and Install
C13 Generator Set Engine Electronic Control Module - Remove and Install
2013/09/09 A New Elbow Is Used on Certain 3500 Engines {1371}
330F MHPU Mobile Hydraulic Power Unit Machine System Solenoid Valve (Proportional Reducing) - Calibrate - Boom Down Regeneration
3516C Locomotive Engines Selective Catalytic Reduction Relay - Test
C7.1 Industrial Engine Fault Logging
3512C Petroleum Engines Engine Oil Cooler - Remove and Install
C7.1 Engines DEF Pressure Is High
3512E Petroleum Engines Engine Oil Cooler - Disassemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies DC Bus Capacitor - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Assemble
3512E Petroleum Engines Engine Oil Pump - Remove and Install
3512C Petroleum Engines Vibration Damper - Remove and Install
3512E Petroleum Engines Flywheel Housing - Remove
3512C Petroleum Engines Catalyst - Remove and Install
3512E Petroleum Engines Hydraulic Starting Motor - Remove and Install
399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H} 399-9725 SCR Catalyst Lifting Device{0629, 0632, 1075, 108H}