Fuel Priming Pump - Remove and Install
Show/hide table
注意 |
---|
在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。 有关收集和盛接 Cat® 产品油液的合适工具和用品,请参阅专门出版物, PERJ1017, "代理商维修工具目录"。 按照本地法规和要求处置所有油液。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 将燃油供应转到断开位置。
Show/hide table
图 1 g03413898 - 拆下螺栓 (1)、螺栓 (2) 和燃油注油泵 (3)。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 按与拆卸相反的顺序安装燃油注油泵 (3)。
Caterpillar Information System:
349F and 352F Excavator Machine System Connector Locations
C13 Generator Set Engine Electric Starting Motor - Remove and Install
C13 Generator Set Engine Electronic Control Module - Remove and Install
2013/09/09 A New Elbow Is Used on Certain 3500 Engines {1371}
330F MHPU Mobile Hydraulic Power Unit Machine System Solenoid Valve (Proportional Reducing) - Calibrate - Boom Down Regeneration
3516C Locomotive Engines Selective Catalytic Reduction Relay - Test
C13 Generator Set Engine Alternator - Remove and Install
C7.1 Engines Diesel Particulate Filter Temperature Is Low
2013/08/15 Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
2015/05/29 Improved Camshafts Are Now Used on Certain C15 and C18 Machine Engines {1210}
2013/08/06 A New Upgraded Starter Is Used for Certain 3512, 3512B, 3512B HD, and 3512CEngines {1453}
3512C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
C13 Generator Set Engine Vibration Damper and Pulley - Remove and Install
C13 Generator Set Engine Turbocharger - Remove and Install
C7.1 Industrial Engine Fan Clearance - Check
3512C Petroleum Engines Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
3512C Petroleum Engines Air Shutoff - Remove and Install
C13 Generator Set Engine Engine Support (Front) - Remove and Install
C7.1 Industrial Engine Fault Logging
3512C Petroleum Engines Engine Oil Cooler - Remove and Install
C7.1 Engines DEF Pressure Is High
3512E Petroleum Engines Engine Oil Cooler - Disassemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies DC Bus Capacitor - Remove and Install
3512E Petroleum Engines Engine Oil Cooler - Assemble