Refill Capacities
Engine Oil
The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications in order to find the capacity of the auxiliary oil filter.
Show/hide table
Engine Refill Capacities     |
||
---|---|---|
Compartment or System     | Liters     | Quarts     |
Crankcase Oil Sump (1)     | 17 L     | 18 qt     |
Show/hide table
( 1 ) | These values are the approximate capacities for the crankcase oil sump (aluminum) which includes the standard factory installed oil filters. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
Coolant
Show/hide table
Engine Refill Capacities     |
||
---|---|---|
Compartment or System     | Liters     | Quarts     |
Engine Only     | 22 L     | 23 qt     |
External System Per OEM (1)     |     |     |
Show/hide table
( 1 ) | The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Refer to the OEM specifications. Enter the value for the capacity of the External System in this row. |
Caterpillar Information System:
CX31 On-Highway Transmission Torque Converter Housing
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
C32 Generator Set Overhaul Considerations
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Design
C280-16 Engine Fuel Filter Housings - Remove
374F Excavator Hydraulic System General Information (Swing System)
G3500H Generator Set Engine Sensor Supply - Test
C13 Tier 4 Final Engines Engine Design
3512C Petroleum Engines Coolant Diverter - Test
C4.4 and C7.1 Engines Sensor Signal (Analog, Passive) - Test
320E and 323E Excavators Machine System Specifications Control Valve (Stick Lowering)
3500B Industrial Engines Maintenance Interval Schedule
C9.3 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C1.5 and C2.2 Engines for Caterpillar Built Machines Piston and Rings
C1.5 and C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor Bushing - Remove and Install
C280-16 Engine Fuel Filter Housings - Disassemble
C280-16 Engine Fuel Filter Housings - Assemble
C280-16 Engine Fuel Filter Housings - Install
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Engine Exhaust Out
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Exhaust Pipe Out
3512E Land Electric Drive Coolant (ELC) - Change
3512E Land Electric Drive Coolant (DEAC) - Change