Torque Converter Housing
Show/hide table
Illustration 1 | g03375519 |
Show/hide table
Specification for 265-5132 Torque Converter Housing Gp     | |||
Item     | Qty     | part     | Specification Description     |
1     | 13     | 8T-4184 Bolt     | Torque to 100 ± 20 N·m (74 ± 15 lb ft).     |
2     | 7     | 6V-5684 Bolt     | Torque to 100 ± 20 N·m (74 ± 15 lb ft).     |
3     | 8     | 160-8750 Bolt     | Torque to 100 ± 20 N·m (74 ± 15 lb ft).     |
4     | 1     | 4H-6112 Breather     | Torque to 35 ± 3 N·m (26 ± 2 lb ft).     |
5     | 1     | 270-1705 Lip Type Seal     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
6     | 5     | 160-8750 Bolt     | Torque to 100 ± 20 N·m (74 ± 15 lb ft).     |
7     | 1     | 6V-5843 Bolt     | Torque to 55 ± 10 N·m (41 ± 7 lb ft).     |
8     | 2     | 5P-8347 Bolt     | Torque to 28 ± 7 N·m (248 ± 62 lb in).     |
Caterpillar Information System:
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
C32 Generator Set Overhaul Considerations
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Design
C280-16 Engine Fuel Filter Housings - Remove
374F Excavator Hydraulic System General Information (Swing System)
G3500H Generator Set Engine Sensor Supply - Test
C13 Tier 4 Final Engines Engine Design
3512C Petroleum Engines Coolant Diverter - Test
C4.4 and C7.1 Engines Sensor Signal (Analog, Passive) - Test
320E and 323E Excavators Machine System Specifications Control Valve (Stick Lowering)
3500B Industrial Engines Maintenance Interval Schedule
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Power Is Intermittently Low or Power Cutout Is Intermittent
C6.6 Generator Sets Refill Capacities
C9.3 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C1.5 and C2.2 Engines for Caterpillar Built Machines Piston and Rings
C1.5 and C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor Bushing - Remove and Install
C280-16 Engine Fuel Filter Housings - Disassemble
C280-16 Engine Fuel Filter Housings - Assemble
C280-16 Engine Fuel Filter Housings - Install
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Engine Exhaust Out
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Exhaust Pipe Out
3512E Land Electric Drive Coolant (ELC) - Change