C280-16 Engine Caterpillar


Fuel Filter Housings - Install

Usage:

C280-16 ENS

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g03375128

  1. Attach a suitable lifting device to fuel filter housing (4). Fuel filter housing (4) weighs approximately 75 kg (165 lb).

  2. Put fuel filter housing (4) in place and install bolts (3).


    Illustration 2g03375073

  3. Connect tube assembly (1) and tube assembly (2).

End By:

  1. Install the fuel filter elements. Refer to Disassembly and Assembly, "Fuel Filters - Remove and Install".

Caterpillar Information System:

C280-16 Engine Fuel Filter Housings - Assemble
C280-16 Engine Fuel Filter Housings - Disassemble
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor Bushing - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
C1.5 and C2.2 Engines for Caterpillar Built Machines Piston and Rings
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C9.3 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C6.6 Generator Sets Refill Capacities
CX31 On-Highway Transmission Torque Converter Housing
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
C32 Generator Set Overhaul Considerations
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Design
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Engine Exhaust Out
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Exhaust Pipe Out
3512E Land Electric Drive Coolant (ELC) - Change
3512E Land Electric Drive Coolant (DEAC) - Change
C7.1 Marine Generator Set Control Panel - EMCP 4.2 (If Equipped)
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
3516C HD Petroleum Well Service Engines Electronic Control Module (ECM)
C13, C15, and C18 Tier 4 Final Engines Relay (ARD Nozzle Heater)
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
C13, C15, and C18 Tier 4 Final Engines Exhaust Combustion (ARD) and Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.