Compression Brake - Assemble - Valve Assembly
- Install O-ring seal (5) onto compression brake (1).
Show/hide table
Illustration 2 g01456425 Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
Note: Lubricate the O-ring seals sparingly with clean engine oil.
- Install O-rings (4) onto valve (3).
Show/hide table
Illustration 3 g01455416 - Install valve assembly (3) into compression brake (1).
- Install bolts (2). Tighten bolts (2) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
Show/hide table
Illustration 1 | g01456431 |
Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
Note: Lubricate the O-ring seals sparingly with clean engine oil.
End By:
- Install the compression brake.
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Relief Valve (Cold Start) - Test
2013/03/29 An Improved Torque Sequence Is Used on Certain C18 Marine Engine Valve Covers {1107}
C32 Marine Generator Set Overhaul Considerations
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
G3500H Generator Set Engine Speed/Timing - Test
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Water Pump - Assemble
797B Off-Highway Truck Main Drive Shaft Universal Joint - Inspect
C9.3 Engines for Caterpillar Built Machines Water Pump - Disassemble
C13, C15, and C18 Tier 4 Final Engines Water Pump
2013/04/22 A New Exhaust Shield Group is Available for a G3516B Engine {1067}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C4.4 and C7.1 Engines Data Link - Test
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C9.3 Engines for Caterpillar Built Machines Rocker Arm - Disassemble
C9.3 Engines for Caterpillar Built Machines Rocker Arm - Assemble
C9.3 Engines for Caterpillar Built Machines Cylinder Head - Remove
C9.3 Engines for Caterpillar Built Machines Cylinder Head - Install