Exhaust Manifold
Show/hide table
| |
| 图 1 | g03363042 |
|
发动机俯视图 | |
Show/hide table
| |
| 图 2 | g03363044 |
|
拧紧顺序 | |
Show/hide table
| 343-0591 排气歧管总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 133-3359 排气歧管 | 在装配前，将一薄层 2P-2333 高温密封胶涂覆到阳端歧管的外径和阴端歧管的内径上。从装配好的接头上除去多余的密封胶。 |
| 2 | 12 | 106-1792 锥形锁紧螺柱 | 拧紧至扭矩为 |
| 3 | 12 | 2N-2766 锁紧螺母 | 在装配前，向螺纹和轴承表面涂覆 Loctite C5A 铜防咬合剂。 |
| 按照数字顺序将锁紧螺母拧紧至扭矩为 |
|||
| 再次按照数字顺序将锁紧螺母拧紧至扭矩为 |
|||
| 4 | 1 | 375-8487 排气歧管 | 在装配前，将一薄层 2P-2333 高温密封胶涂覆到阳端歧管的外径和阴端歧管的内径上。从装配好的接头上除去多余的密封胶。 |
| 5 | 4 | 357-0351 锥形锁紧螺柱 | 拧紧至扭矩为 |
| 6 | 2 | 9N-5085 卡箍 | 拧紧至扭矩至 |
| 7 | 1 | 352-1149 排气歧管 | 在装配前，将一薄层 2P-2333 高温密封胶涂覆到阳端歧管的外径和阴端歧管的内径上。从装配好的接头上除去多余的密封胶。 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2013/04/22 A New Exhaust Shield Group is Available for a G3516B Engine {1067}
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Relief Valve (Cold Start) - Test
2013/03/29 An Improved Torque Sequence Is Used on Certain C18 Marine Engine Valve Covers {1107}
C32 Marine Generator Set Overhaul Considerations
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
G3500H Generator Set Engine Speed/Timing - Test
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Water Pump - Assemble
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C4.4 and C7.1 Engines Data Link - Test
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C9.3 Engines for Caterpillar Built Machines Rocker Arm - Disassemble
C9.3 Engines for Caterpillar Built Machines Rocker Arm - Assemble
C9.3 Engines for Caterpillar Built Machines Cylinder Head - Remove
C9.3 Engines for Caterpillar Built Machines Cylinder Head - Install
C9.3 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C9.3 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C7.1 Marine Engine Engine - Remove and Install