Turbocharger
Show/hide table
图 1 | g03363047 |
典型示例 发动机后视图 |
Show/hide table
374-8294 涡轮增压器总成 、 374-8295 涡轮增压器总成 、 374-8296 涡轮增压器总成 和 374-8297 涡轮增压器总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 4     | 375-2467 法兰锁紧螺母     | 在装配前,使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。     |
拧紧至扭矩为 70 ± 5 N·m (52 ± 4 lb ft)。 |
|||
-     | -     | -     | 将压缩机卡箍组件拧紧至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。     |
-     | -     | -     | 使用以下步骤拧紧卡箍组件: 1. 拧紧涡轮卡箍组件至 18 N·m (159 lb in)。 2. 松开涡轮卡箍组件 1 至 2 圈。 3. 再次拧紧卡箍组件至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。     |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2013/04/22 A New Exhaust Shield Group is Available for a G3516B Engine {1067}
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Relief Valve (Cold Start) - Test
2013/03/29 An Improved Torque Sequence Is Used on Certain C18 Marine Engine Valve Covers {1107}
C32 Marine Generator Set Overhaul Considerations
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
G3500H Generator Set Engine Speed/Timing - Test
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C4.4 and C7.1 Engines Data Link - Test
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C9.3 Engines for Caterpillar Built Machines Rocker Arm - Disassemble
C9.3 Engines for Caterpillar Built Machines Rocker Arm - Assemble
C9.3 Engines for Caterpillar Built Machines Cylinder Head - Remove
C9.3 Engines for Caterpillar Built Machines Cylinder Head - Install
C9.3 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C9.3 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C7.1 Marine Engine Engine - Remove and Install
Installation of the Bolted Exhaust Shield for Certain G3500B Engines {1067} Installation of the Bolted Exhaust Shield for Certain G3500B Engines {1067}