Water Pump - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Group | 1 |
Start By:
- Remove the water pump.
- Remove bolts (10) and remove pulley (9).
- Remove bolts (1) and remove cover (2).
- Remove O-ring (3).
- Use Tooling (A) and a suitable press to remove shaft assembly (7) from impeller (4) and housing (6).
- Use Tooling (A) and a suitable press to remove seal assembly (5) from shaft assembly (7).
- Use Tooling (A) and a suitable press to remove hub (8) from shaft assembly (7).
Show/hide table
| |
| Illustration 1 | g01358794 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Water Pump
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Air Lines
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
C9.3 Engines for Caterpillar Built Machines Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Cooled by Coolant
2013/04/04 An Additional Spacer Is Now Used in the Crankshaft Pulley Group of Certain C7 and C9 Marine Engines {1205}
797B Off-Highway Truck Main Drive Shaft Universal Joint - Inspect
C9.3 Engines for Caterpillar Built Machines Water Pump - Assemble
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3500H Generator Set Engine Speed/Timing - Test
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C32 Marine Generator Set Overhaul Considerations
2013/03/29 An Improved Torque Sequence Is Used on Certain C18 Marine Engine Valve Covers {1107}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Relief Valve (Cold Start) - Test
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly
2013/04/22 A New Exhaust Shield Group is Available for a G3516B Engine {1067}