Water Pump
Show/hide table
| |
| 图 1 | g03362668 |
|
366-0168 水泵总成 | |
Show/hide table
| 366-0227 水泵总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 246-3129 泵叶轮 | 泵叶轮应与轴平齐，偏差在 |
| 2 | 1 | 153-1256 唇形密封 | 安装唇形密封时，使主密封唇朝向水泵主动齿轮。 用压具压装油封，直到油封与壳体表面齐平，如图所示。 请勿用手安装唇形密封。 |
| 3 | 1 | 336-2212 水泵密封组件 | 将密封总成压装到轴上，直到杯完全座入泵壳体内。 |
| 4 | 1 | 361-8234 水泵齿轮 | 压装齿轮，直到齿轮与轴承平齐。 |
| 5 | 1 | 203-3831 杯塞 | 杯塞在机加工表面的最大安装深度为 |
| 6 | - | 246-3130 水泵轴 | 叶轮端的轴径为 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Air Lines
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
C9.3 Engines for Caterpillar Built Machines Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Cooled by Coolant
2013/04/04 An Additional Spacer Is Now Used in the Crankshaft Pulley Group of Certain C7 and C9 Marine Engines {1205}
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold
C9.3 Engines for Caterpillar Built Machines Water Pump - Disassemble
797B Off-Highway Truck Main Drive Shaft Universal Joint - Inspect
C9.3 Engines for Caterpillar Built Machines Water Pump - Assemble
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove
G3500H Generator Set Engine Speed/Timing - Test
C9.3 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install
C32 Marine Generator Set Overhaul Considerations
2013/03/29 An Improved Torque Sequence Is Used on Certain C18 Marine Engine Valve Covers {1107}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Relief Valve (Cold Start) - Test
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly