Engine Oil Scavenge Pump - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-2321 | Combination Puller | 1 |
| 9S-9155 | Spacer | 1 | |
Start By:
- Remove the engine oil scavenge pump. Refer to Disassembly and Assembly, "Engine Oil Scavenge Pump - Remove".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolt (1).
- Use Tooling (A) to remove gear (2).
Show/hide table
Illustration 2 g00923147 - Mark body (3) and cover (6) for assembly purposes.
- Remove bolts (7) and cover (6).
- Remove dowels (5) and sleeve bearings (4) from cover (6).
Show/hide table
Illustration 3 g01205955 - Remove drive shaft assembly (8) and idler shaft assembly (9) from body (3).
Show/hide table
Illustration 4 g01205958 - Remove sleeve bearings (10) from body (3).
Show/hide table
| |
| Illustration 1 | g01205956 |
Caterpillar Information System:
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
C18 Marine Engine Coolant - Change
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
G3520E Generator Set Engines EPG Circuit Breaker - Test
C18 Marine Auxiliary and Marine Generator Set Engines ECM Does Not Communicate with Other Modules
C280-16 Petroleum Engine Camshaft Bearing Position
3516B Engine Engine Oil and Water Pump Drive - Install
3516B Engine Engine Oil and Water Pump Drive - Assemble
C32 Marine Engines Aftercooler - Remove
C280-16 Petroleum Engine Camshaft Bearings
C280-16 Petroleum Engine Oil Mist Detector
C280-16 Petroleum Engine Air Lines
C280-16 Petroleum Engine Piston and Rings
C280-16 Petroleum Engine Fuel Injection Lines
C280-16 Petroleum Engine Air Starting Control
C280-16 Petroleum Engine Turbocharger Oil Lines
C280-16 Petroleum Engine Connecting Rod
C280-16 Petroleum Engine Exhaust Bypass
C280-16 Petroleum Engine Exhaust Manifold
C280-16 Petroleum Engine Engine Mount