Engine Oil and Water Pump Drive - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that the O-ring seals are installed in the grooves of the adapter assemblies. Also apply clean engine oil to the seals.
Show/hide table
Illustration 1 g00921411 - Install front adapter assembly (3) and bolts (4).
Show/hide table
Illustration 2 g00921410 - Install rear adapter assembly (2) and bolts (1).
End By:
- Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".
- Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
3516B Engine Engine Oil and Water Pump Drive - Assemble
C18 Marine Engine Sensors and Electrical Components
C280-16 Petroleum Engine Turbocharger
C280-16 Petroleum Engine Water Temperature Regulator
C280-16 Petroleum Engine Fuel Injector
C280-16 Petroleum Engine Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
C280-16 Petroleum Engine Aftercooler
C280-16 Petroleum Engine Engine Oil Lines (Prelubrication)
C280-16 Petroleum Engine Engine Oil Lines (Centrifugal Filter)
C32 Marine Engines Water Temperature Regulator - Remove and Install
2012/12/19 A New Pyrometer Is Available For Certain 3500 and G3500 Engines {7451, 7466, 7490}
C18 Marine Engine Aftercooler Condensate Drain Valve - Inspect/Clean
C280-16 Petroleum Engine Camshaft Bearing Position
C18 Marine Auxiliary and Marine Generator Set Engines ECM Does Not Communicate with Other Modules
G3520E Generator Set Engines EPG Circuit Breaker - Test
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
C18 Marine Engine Coolant - Change
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
3516B Engine Engine Oil Scavenge Pump - Disassemble
C32 Marine Engines Aftercooler - Remove