Aftercooler - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the coolant system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
- Remove bolts (1) and elbows (2). Remove seal (3) .
Show/hide table
Illustration 1 | g03336898 |
- Remove hose clamps (5) and disconnect hoses (4) .
Show/hide table
Illustration 2 | g03336900 |
Show/hide table
Illustration 3 | g03336901 |
- Remove bolts (6) and attach Tooling (A) and a suitable lifting device to the aftercooler (7). The approximate weight of the aftercooler (7) is 45 kg (100 lb).
- Remove bolt (8) then remove the aftercooler (7) .
Caterpillar Information System:
3516B Engine Engine Oil Scavenge Pump - Disassemble
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
C18 Marine Engine Coolant - Change
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
G3520E Generator Set Engines EPG Circuit Breaker - Test
C18 Marine Auxiliary and Marine Generator Set Engines ECM Does Not Communicate with Other Modules
C280-16 Petroleum Engine Camshaft Bearing Position
3516B Engine Engine Oil and Water Pump Drive - Install
C280-16 Petroleum Engine Camshaft Bearings
C280-16 Petroleum Engine Oil Mist Detector
C280-16 Petroleum Engine Air Lines
C280-16 Petroleum Engine Piston and Rings
C280-16 Petroleum Engine Fuel Injection Lines
C280-16 Petroleum Engine Air Starting Control
C280-16 Petroleum Engine Turbocharger Oil Lines
C280-16 Petroleum Engine Connecting Rod
C280-16 Petroleum Engine Exhaust Bypass
C280-16 Petroleum Engine Exhaust Manifold
C280-16 Petroleum Engine Engine Mount
C175-16 Locomotive Engine Turbocharger Turbine Temperature Is High