Camshaft Bearings
Show/hide table
Illustration 1 | g03164339 |
Show/hide table
Specification for 1W-0105 Camshaft Bearing | |||
Item | Qty | Part | Specification Description |
The left camshaft bearings and the right camshaft bearings in the rear of the cylinder block must be installed such that the engine timing pin will pass freely through the cylinder block and the bearing. | |||
1 | 18 | 1W-0105 Camshaft Bearing | Install the camshaft bearings with the bearing joint toward the top face of the bore in the cylinder block. |
A | - | - | After installation, bore in the camshaft bearing is |
B | - | - | Angle from the horizontal centerline to the center of the timing pin hole in the rear camshaft bearing is 25 ± 5 degrees. |
- | - | - | Diameter of the camshaft journal is |
Caterpillar Information System:
C32 Marine Engines Aftercooler - Remove
3516B Engine Engine Oil Scavenge Pump - Disassemble
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
C18 Marine Engine Coolant - Change
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
G3520E Generator Set Engines EPG Circuit Breaker - Test
C18 Marine Auxiliary and Marine Generator Set Engines ECM Does Not Communicate with Other Modules
C280-16 Petroleum Engine Camshaft Bearing Position
C280-16 Petroleum Engine Oil Mist Detector
C280-16 Petroleum Engine Air Lines
C280-16 Petroleum Engine Piston and Rings
C280-16 Petroleum Engine Fuel Injection Lines
C280-16 Petroleum Engine Air Starting Control
C280-16 Petroleum Engine Turbocharger Oil Lines
C280-16 Petroleum Engine Connecting Rod
C280-16 Petroleum Engine Exhaust Bypass
C280-16 Petroleum Engine Exhaust Manifold
C280-16 Petroleum Engine Engine Mount
C175-16 Locomotive Engine Turbocharger Turbine Temperature Is High
3516B Engine Engine Oil Scavenge Pump - Assemble