System - Set
Modulated Joystick ("Remote Switch")
Show/hide table
| |
| Illustration 1 | g03163480 |
|
Modulated joystick (1) Remote switch | |
Both the standard joystick and the modulated joystick will function, but the modulated joystick offers additional functionality for a Cat Grade Control user. With a standard joystick installed, the user may receive the following error related to the modulated joysticks:
- "The modulated joystick is enabled + Standard joystick is installed"
Perform the following procedure to troubleshoot the Cat Grade Control remote switch (modulated joystick):
- Check machine specification.
Note: The modulation joystick is optional. The user must select the modulated joystick. Cat Grade Control labels the modulation joystick "Remote Switch".
Show/hide table
Illustration 2 g03163597 - If the standard joystick is applied, change the "CGC Setting" configuration:
Show/hide table
Illustration 3 g03163598 - If the modulated joystick is applied, change the joystick from standard to the modulated joystick. Then, check the "Remote Switch" configuration.
Caterpillar Information System:
G3520E Generator Set Engines EPG Circuit Breaker - Test
C18 Marine Auxiliary and Marine Generator Set Engines ECM Does Not Communicate with Other Modules
C280-16 Petroleum Engine Camshaft Bearing Position
3516B Engine Engine Oil and Water Pump Drive - Install
3516B Engine Engine Oil and Water Pump Drive - Assemble
C18 Marine Engine Sensors and Electrical Components
C280-16 Petroleum Engine Turbocharger
C280-16 Petroleum Engine Water Temperature Regulator
C280-16 Petroleum Engine Fuel Injector
C280-16 Petroleum Engine Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
C280-16 Petroleum Engine Aftercooler
C280-16 Petroleum Engine Engine Oil Lines (Prelubrication)
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
C18 Marine Engine Coolant - Change
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
3516B Engine Engine Oil Scavenge Pump - Disassemble
C32 Marine Engines Aftercooler - Remove
C280-16 Petroleum Engine Camshaft Bearings
C280-16 Petroleum Engine Oil Mist Detector
C280-16 Petroleum Engine Air Lines
C280-16 Petroleum Engine Piston and Rings