Camshaft Bearing Position
Show/hide table
 | |
| Illustration 1 | g03162857 |
Right side view | |
Show/hide table
| Specification for 149-0491 Cylinder Block Gp | |||
| Item | Qty | Part | Specification Description |
| The right camshaft bearings are installed into the cylinder block at the following positions: | |||
| - | - | - | Distance (A) is 3679.0 mm (144.84 inch). |
| - | - | - | Distance (B) is 3219.0 mm (126.73 inch). |
| - | - | - | Distance (C) is 2759.0 mm (108.62 inch). |
| - | - | - | Distance (D) is 2299.0 mm (90.51 inch). |
| - | - | - | Distance (E) is 1839.0 mm (72.40 inch). |
| - | - | - | Distance (F) is 1379.0 mm (54.29 inch). |
| - | - | - | Distance (G) is 919.0 mm (36.18 inch). |
| - | - | - | Distance (H) is 459.0 mm (18.07 inch). |
Show/hide table
 | |
| Illustration 2 | g03162877 |
Left side view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| The left camshaft bearings are installed into the cylinder block at the following positions: | |||
| - | - | - | Distance (J) is 3761.0 mm (148.07 inch). |
| - | - | - | Distance (K) is 3301.0 mm (129.96 inch). |
| - | - | - | Distance (L) is 2841.0 mm (111.85 inch). |
| - | - | - | Distance (M) is 2381.0 mm (93.74 inch). |
| - | - | - | Distance (N) is 1921.0 mm (75.63 inch). |
| - | - | - | Distance (P) is 1461.0 mm (57.52 inch). |
| - | - | - | Distance (R) is 1001.0 mm (39.41 inch). |
| - | - | - | Distance (S) is 541.0 mm (21.30 inch). |
| - | - | - | Distance (T) is 81.0 mm (3.19 inch). |
Caterpillar Information System:
3516B Engine Engine Oil and Water Pump Drive - Install
3516B Engine Engine Oil and Water Pump Drive - Assemble
C18 Marine Engine Sensors and Electrical Components
C280-16 Petroleum Engine Turbocharger
C280-16 Petroleum Engine Water Temperature Regulator
C280-16 Petroleum Engine Fuel Injector
C280-16 Petroleum Engine Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
C280-16 Petroleum Engine Aftercooler
C280-16 Petroleum Engine Engine Oil Lines (Prelubrication)
C280-16 Petroleum Engine Engine Oil Lines (Centrifugal Filter)
C32 Marine Engines Water Temperature Regulator - Remove and Install
2012/12/19 A New Pyrometer Is Available For Certain 3500 and G3500 Engines {7451, 7466, 7490}
C18 Marine Auxiliary and Marine Generator Set Engines ECM Does Not Communicate with Other Modules
G3520E Generator Set Engines EPG Circuit Breaker - Test
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
C18 Marine Engine Coolant - Change
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
3516B Engine Engine Oil Scavenge Pump - Disassemble
C32 Marine Engines Aftercooler - Remove
C280-16 Petroleum Engine Camshaft Bearings