Fuel Injection Lines
Show/hide table
Illustration 1 | g03164416 |
Front view |
Show/hide table
Illustration 2 | g03164418 |
Rear view |
Show/hide table
Specifications for 316-0779 Fuel Injection Lines Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 6V-5049 O-Ring Seal     | Before assembly, lightly lubricate the bore and seal with the lubricant that is being sealed.     |
2     | 32     | 268-1522 Connector     | Torque to 105 ± 10 N·m (77 ± 7 lb ft).     |
3     | 32     | 238-5080 O-Ring Seal     | Before assembly, lightly lubricate the bore and seal with the lubricant that is being sealed.     |
4     | 30     | 6V-8639 Connector     | Torque to 105 ± 10 N·m (77 ± 7 lb ft).     |
5     | 1     | 2P-1298 Tee     | Torque to 105 ± 10 N·m (77 ± 7 lb ft).     |
6     | 7     | 6V-1903 O-Ring Seal     | Before assembly, lightly lubricate the bore and seal with the lubricant that is being sealed.     |
7     | 3     | 9S-4188 Plug     | Torque to 105 ± 10 N·m (77 ± 7 lb ft).     |
8     | 2     | 7J-7187 Connector     | Torque to 105 ± 10 N·m (77 ± 7 lb ft).     |
9     | 1     | 214-7568 O-Ring Seal     | Before assembly, lightly lubricate the bore and seal with the lubricant that is being sealed.     |
10     | 1     | 330-9050 Spring     | Length under test force is 56.00 mm (2.205 inch).     |
Test force is 218.262 ± 17.000 N (49.067 ± 3.822 lb). |
|||
Free length after test is 77.00 mm (3.032 inch). |
|||
11     | 1     | 3P-1156 O-Ring Seal     | Before assembly, lightly lubricate the bore and seal with the lubricant that is being sealed.     |
12     | -     | -     | Lubricate threads of 010-2461 Square Head Setscrew and bore of 419-5687 Valve Body after you install the retainer and the seal.     |
C     | -     | -     | Adjust bolt height to provide 820 ± 20 kPa (119 ± 3 psi) fuel pressure. Engine must be at rated load and speed.     |
Caterpillar Information System:
C280-16 Petroleum Engine Piston and Rings
C280-16 Petroleum Engine Air Lines
C280-16 Petroleum Engine Oil Mist Detector
C280-16 Petroleum Engine Camshaft Bearings
C32 Marine Engines Aftercooler - Remove
3516B Engine Engine Oil Scavenge Pump - Disassemble
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Timing - Calibrate
C18 Marine Engine Coolant - Change
Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454} Exciter Rotor Is Loosening on Certain 3512, and C32 Generator Sets{4454}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Accuracy - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Pressure Sensor - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Calibrate
C280-16 Petroleum Engine Air Starting Control
C280-16 Petroleum Engine Turbocharger Oil Lines
C280-16 Petroleum Engine Connecting Rod
C280-16 Petroleum Engine Exhaust Bypass
C280-16 Petroleum Engine Exhaust Manifold
C280-16 Petroleum Engine Engine Mount
C175-16 Locomotive Engine Turbocharger Turbine Temperature Is High
3516B Engine Engine Oil Scavenge Pump - Assemble
C280-16 Petroleum Engine Inlet Manifold Air Pressure Sensor
3516B Engine Valve Mechanism Cover - Remove and Install
3516B Engine Valve Mechanism Cover Base - Remove and Install
C280-16 Petroleum Engine Exhaust Manifold