Water Temperature Control Valve - Assemble
装配步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | - | Loctite 5900 | 1 |
- 将马达安装件组件 (11) 安装到阀体中。 将导螺杆 (14) 旋入阀活塞 (15) 的中心。 将导螺杆的轴 (14) 转入阀活塞 (15) 的中心。
Show/hide table
 | |
| 图 1 | g02792869 |
Show/hide table
 | |
| 图 2 | g02792900 |
- 将新 O 形密封圈 (13) 安装到阀体中。
- 确保导螺杆 (14) 完全插入轴轴承 (16) 中。
- 将螺栓 (12) 安装到马达安装件组件 (11) 。
- 将控制模块 (10) 定位到马达安装件组件 (11) 和阀体中。
Show/hide table
 | |
| 图 3 | g02792750 |
- 安装垫圈和螺栓 (9) 。
- 检查驱动销 (8) 的定位。
Show/hide table
 | |
| 图 4 | g02792672 |
Show/hide table
 | |
| 图 5 | g02792722 |
- 安装新密封垫。 定位壳体 (6) ，然后安装四颗螺栓 (7) 。
- 将马达 (5) 安装到壳体 (6) 中。
- 安装垫圈和螺栓 (4) 。
- 如有需要，在盖 (1) 的中心钻一个孔，然后将工具 (A) 涂抹到盖 (1) 的表面和马达壳体表面。
Show/hide table
 | |
| 图 6 | g02792903 |
Show/hide table
 | |
| 图 7 | g02792573 |
Show/hide table
 | |
| 图 8 | g02792909 |
- 安置盖 (1) 并安装螺栓 (2) 。
- 连接线束组件 (3) 。 在护孔环接触线束组件 (3) 的马达壳体的密封压盖周围涂抹工具 (A) 。
- 如有需要，将弯头接头 (17) 安装到盖 (1) 中。
- 定位软管组件 (19) 后安装卡箍组件 (18) 。
- 安装支架 (23) 和螺栓 (22) 。
- 安装卡箍组件 (20) 和螺栓 (21) 、垫圈和螺母。
- 用热缩管 (24) 盖住线束组件，然后用热风枪在线束组件上形成管套。 确保管套的粘合剂从线束组件和管套之间溢出。
Show/hide table
 | |
| 图 9 | g02792911 |
End By: 安装水温控制阀。
Caterpillar Information System:
An Aid To Reading Multimeter Scales{0785} An Aid To Reading Multimeter Scales{0785}
C18 Generator Sets Circuit Breakers - Reset
C13, C15, and C18 Tier 4 Interim Engines Cat ET Service Error Identifiers
C13 and C15 On-Highway Engines Refill Capacities
C13 and C15 On-Highway Engines Grounding Stud - Inspect/Clean/Tighten
3512B and 3512C Petroleum Generator Set Engines Engine Monitoring System
2012/02/10 A New Bracket Should Be Used When Replacing the Combustion Air Tube on Certain C13 Truck Engines {108N}
2012/03/08 New Turbocharger Oil Lines Are Used on C175-16 Generator Set Engines {1052, 1307}
C175-16 Locomotive Engine Water Temperature Control Valve - Disassemble
325D and 329D Excavators Machine System Specifications Travel Motor and Mounting
C13, C15, and C18 Tier 4 Final Engines DEF Module Does Not Respond
3512C and 3516C Marine Auxiliary Engines Alternator Problem - Charging Problem and/or Noisy Operation
C18 Generator Sets Engine Air Cleaner Service Indicator - Inspect
C13 and C15 On-Highway Engines Plate Locations and Film Locations
C13 and C15 On-Highway Engines Product Description
C13 and C15 On-Highway Engines Fluid Recommendations
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning System Electrical Schematic
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Basic Engine
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cylinder Heads
3516C Generator Set Engines Cold Cylinder Cutout
725C2 Articulated Truck Diesel Exhaust Fluid Filter - Replace - Emission Related Component
2012/02/08 A New Air Shutoff Is Used on 3606, 3608, and C280-8 Engines {1071, 1078}
CEM Locomotive Aftertreatment Diesel Exhaust Fluid Pump - Replace
3516C Generator Set Engines Data Link Configuration Status - Test