XQ60 Rental Generator Set Caterpillar

Full Engine Views

Illustration 1	g03373765
Typical example (1) 10 Pin and 62 pin connector (2) Fuel temperature sensor (3) Oil pressure switch (4) Primary speed/timing sensor (crankshaft position sensor) (5) Water in fuel switch (6) Fuel metering valve

Illustration 2	g02477200
Typical example (7) Fuel manifold (rail) pressure sensor (8) Electronic control module (9) Secondary speed/timing sensor (camshaft position sensor) (10) Alternator (11) Coolant temperature sensor (12) Intake throttle valve

Illustration 3	g02529496
Typical example (13) Inlet manifold pressure and temperature sensor. (14) Exhaust temperature sensor connection (15) Exhaust pressure sensor (16) Waste gate regulator (17) Starting motor (18) Oxygen sensor (19) Control valve for the NOx reduction system

Note: Item (13), lower powered engines have separate inlet manifold pressure sensors and inlet manifold temperature sensors.

Engine View Low Power with Separate Inlet Pressure and Inlet Temperature

Illustration 4	g03373789
Typical example (13 A) Inlet pressure sensor (13 B) Inlet temperature sensor

Location Views

Illustration 5	g03373767
Typical example (1) 10 Pin and 62 pin connector (2) Fuel temperature sensor (3) Oil pressure switch (4) Primary speed/timing sensor (crankshaft position sensor) (5) Water in fuel switch (6) Fuel metering valve

Illustration 6	g02529820
Typical example (7) Fuel manifold (rail) pressure sensor (8) Electronic control module (9) Secondary speed/timing sensor (camshaft position sensor) (10) Alternator (11) Coolant temperature sensor (12) Intake throttle valve

Note: The location of item (8) the engine electronic control module will depend on the application.

Illustration 7	g02529821
Typical example (13) Inlet manifold pressure and temperature sensor. (14) Exhaust temperature sensor connection (A) Exhaust temperature sensor (15) Exhaust pressure sensor (16) Waste gate regulator

Illustration 8	g02530397
Typical example (17) Starting motor (18) Position for oxygen sensor (19) NOx reduction control valve

Note: Some engines can have the air intake temperature sensor and the glow plug control unit supplied loose.

Separate Inlet Pressure and Inlet Temperature Views

Illustration 9	g03373791
Typical example (13 A) Intake manifold pressure sensor (13 B) Intake manifold temperature sensor

Engine Option or Parts that are Supplied Loose

Illustration 10	g02821639
Typical example (20) Glow plug control unit (21) Inlet air temperature sensor (22) Breather heater

Some engines can have a breather heater (22) for the crankcase breather installed.